Skip to content

Country

LIVOS OIL

 You found the perfect piece of wood and now it's time to apply a finish!


There are hundreds of finishes to select from, and trust me... we have tried many! We can't seem to find anything we like better than Livos so that's why we carry it.

Kunos by Livos is an oil based, environmentally friendly, wipe-on, low-odor German product. It is pretty much fantastic all around. Here is a link to the Livos website if you are interested in more related information.

Here are some "tips and tricks" that we have discovered finishing dozens of different wood species. Every wood can take finish differently so a test piece is always recommended. Now remember, we are not finishing experts by any means. These are just a compilation of tips that have worked from our experience as well as helpful tricks passed on from our customers.

Recommended Materials:
- sand paper in grits up to 400
- lint free cloths (an old lint free t-shirt will do the trick also)

Other:
- coffee maker
- lamp

Step 1:
Make a coffee

Step 2:
Grab those leftover coffee grounds and put them in a dish to dry them out. (only applicable for woods with voids such as natural edge lumber, spalted woods etc. For that type of project, read this post before continuing.

Step 3:
Sand, sand, sand. Proper lighting is key. Imperfections will not be visible until the finish is applied so take the time to sand properly. Generally speaking, sand no higher than 400.

A helpful way to view sanding marks is to move your lamp to create a cross light.

Step 4:
Make sure you did a good job on step 3.

Step 5:
Mix contents properly with a stick. Wipe on a generous first coat of Livos using your lint free cloth. After 15 minutes, use a new cloth and wipe/buff off all the excess oil. Wipe until the cloth
is dry and no shiny spots remain on the wood. You may have to use more than one cloth. Let sit to dry for 24hrs.

Some people prefer using a brush, particularly for natural edge woods or woods that have density variations.

Step 6: 
Apply a coat of Livos. After 15 minutes, grab a clean cloth and buff the finish into the wood. Ensure all excess oil has been wiped off.

Repeat steps 5 & 6 a minimum of one more time... the more coats, the glossier the effect.

For tabletops and projects that need extra durability, we recommend 4 coats.

Important: Livos recommend the following: KUNOS 243 and 244 oils take approximately 30 days to dry thoroughly. Maximum endurance is reached after 4 weeks. Please take the necessary precautions during this time.

As with any oil product, make sure to use caution with your rags.

 

Previous article How to Apply Rubio Monocoat for Long-Lasting Wood Protection
Next article WOOD SERIES : Wood Basics II

Leave a comment

Comments must be approved before appearing

* Required fields