🇨🇦 Welcome to KJP Select Hardwoods - Canada Woodworking Supplies  🇨🇦

RUBIO MONOCOAT IN CANADA

RSS

 

 

 



Rubio Monocoat Oil Plus 2C is a next-generation product that colours and protects your wood in 1 single layer.
 

The combination of the oil (A) and the accelerator (B) ensures a quick dry, quick cure and superior protection.

 

Step 1: Preparation

 

Sand the surface to minimum 120 grit. Do not sand past 220 grit or the RMC Oil will not adhere to the wood fibers properly

Thoroughly clean the surface to ensure there are no wood particles or dust particles remaining. We recommend using Rubio Monocoat Cleaner when possible for best results.

 

Step 2: Applying the Oil

 

Shake the can. Because pigments can separate and settle, it is also always a good practice to stir the contents very well.

Pour the oil in a mixing can and if using Part B Accelerator, add to can in a ratio of 3:1 Oil:Accelerator. Stir very thoroughly.

Apply the oil using a lint free cloth or plastic trowel. Let sit for 3-5 minutes before wiping off excess oil with a lint free cloth. Keep wiping off until cloth stops absorbing any excess oil on surface area.

 

Step 3: Maintenance

 

Do not clean for 7 days as product cures. Use a Maintenance oil if surface shows wear and tear down the road.

Previous Post Next Post