{"title":"Squares \u0026 Setup","description":"","products":[{"product_id":"adjustabletracksquare","title":"Adjustable Track Square","description":"\u003cp\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003eThe modern track saw has taken the market by storm.\u003c\/strong\u003e\u003cspan style=\"color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e It puts industrial table saw accuracy in the field for remodelers and trim carpenters, and for the garage and basement woodworker, it cuts the shop space required to handle sheet goods in half (compared to a table saw). The concept is simple…put the guide rail on your workpiece, drop the track saw on the guide rail, and a straight cut is guaranteed. But, “straight” isn’t enough. Cuts typically need to be parallel to an existing edge, perpendicular to an existing edge, or at a specific angle. Woodpeckers took care of “parallel” last year when we released the Parallel Guide System. Now they have “perpendicular” (and nearly every other angle) under control with the Adjustable Track Square. The Adjustable Track Square mounts to your Festool, Makita, or Triton guide rail in seconds. Once it’s mounted you have locked-in accuracy for square cuts and cuts at any angle up to 60°.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eSetting up the Adjustable Track Square\u003c\/strong\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e couldn’t be easier. Just slide it on and snap the cam buckle. It’s that fast and that simple.  Accurate cuts are as easy as holding the Track Square against the edge of your stock and running your saw along the rail.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eNeed something other than square?\u003c\/strong\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e Just unlock the protractor clamp, pull back on the catch and rotate the protractor to your desired angle. The catch firmly snaps in any of the detents spaced every 5° and at 22-1\/2°. For angles between the detents, the scale is laser engraved in crisp one-degree increments. The scale is calibrated at the factory and can be easily re-calibrated anytime and anywhere if needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eThe Adjustable Track Square\u003c\/strong\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e improves the accuracy of your cuts with or without clamping the guide rail down. The angle is locked in and the guide rail can’t slide forward while you’re sawing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eThe main frame is machined\u003c\/strong\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e from the same incredibly stable cast and ground aluminum plate Woodpeckers use in their famous precision woodworking squares. The stainless-steel protractor base rotates on a bronze bushing and glides on low-friction wear-resistant pads. Even the cam buckle is stainless steel. In short, whether you use the Adjustable Track Square every day, all day or just on the weekends it’s designed to keep producing perfect accuracy for decades.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eLike all Woodpeckers products, the Adjustable Track Square is precisely machined and carefully inspected in their Strongsville, Ohio, factory.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5 dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/7Xdb1HodsJs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Adjustable Track Square in Systainer","offer_id":31080489844805,"sku":"ADTKSQ-WSYS","price":595.95,"currency_code":"CAD","in_stock":false},{"title":"Adjustable Track Square (No Case)","offer_id":31080489877573,"sku":"ADTKSQ-NC","price":525.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/e19bb85565a7bef3d3ebf14d640559d9fa67c5ab.jpg?v=1573932407"},{"product_id":"mftlayoutassemblysquare","title":"Woodpeckers - MFT Layout \u0026 Assembly Square","description":"\u003cp\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003eWoodpeckers MFT Layout \u0026amp; Assembly Square\u003c\/strong\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e makes quick work of the often-tedious task of aligning your track saw guide rail with the fence of your Festool Multi-Function Table. At 3\/4\" thick, this solid phenolic square can rest flat on the table and intersect with both the fence and the rail at the same time. No more trying to hold a framing square along the guide rail and hoping you’ve got it aligned. If that was this tool’s only trick, it would be a great addition your shop, but there’s more.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eGreat for Assembly Work\u003c\/strong\u003e, Too\u003c\/span\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e. Slots are milled into the phenolic along both edges. This lets you clamp the square to your MFT (or any workbench, for that matter) and then your workpiece to the square. Now your work is perpendicular to the work surface. You can also clamp the square to two joining workpieces, holding them perpendicular to each other. If you use it to square up your work during assembly, don’t worry if you get a little too generous with the glue…in won’t stick to the square.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eLarge Machinery Set-Up\u003c\/strong\u003e Tired of setting up resaw cuts with a small square? The Layout \u0026amp; Assembly Square gives you a generous 15 inches on each side and the 3\/4\" width keeps the square upright while you use both hands for adjustments. At the table saw, the extra length lets you span your saw blade from front to back while setting up your miter gauge. \u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eKeep Your MFT Square\u003c\/strong\u003e Technically, your fence and guide rail don’t have to be square to the holes in your MFT top to give you square cuts. But anyone who has used the system knows that it can be reassuring when everything lines up and you can use your stops and hold downs in conjunction with the fence. The MFT Layout and Assembly Square comes with two 20mm location dogs. Drop them in any two holes in an MFT table top and your square is correctly aligned with all the holes. Now set your guide rail and fence to the square and everyone is on the same page of the playbook.\u003c\/p\u003e\n\u003cp dir=\"ltr\" style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003eWoodpeckers Precision and Quality\u003c\/strong\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e\u003cstrong style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e.\u003c\/strong\u003e They meticulously machine the MFT Layout \u0026amp; Assembly Square from a nearly indestructible solid phenolic. It’s the same material Woodpeckers uses for their top-of-the-line router tables. It won’t warp or twist and it is completely impervious to moisture. The location pins are turned on state-of-the-art CNC lathes and anodized to give them the familiar “Woodpecker Red” color and a tough finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003eLike all Woodpeckers tools, this former \u003cspan class=\"one-time-tool-style\" style=\"box-sizing: border-box; margin: 0px; padding: 0px; font-family: 'Oswald Bold', sans-serif; font-style: italic;\"\u003eOneTIME Tool\u003c\/span\u003e® is precisely built and carefully inspected in their Strongsville, Ohio factory. \u003c\/p\u003e\n\u003ch5 style=\"box-sizing: border-box; margin: 0px 0px 1.5em; padding: 0px; color: #363636; font-family: 'Open Sans', sans-serif; font-size: 14px;\"\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/eqoSKhi06CQ\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"MFT Layout \u0026 Assembly","offer_id":31085205291077,"sku":"WOODPECKERS-MFTLASQR-19","price":249.95,"currency_code":"CAD","in_stock":false},{"title":"MFT Positioning Dogs (2 Pack)","offer_id":31085205323845,"sku":"WOODPECKERS-MFTPOSDOG2-19","price":29.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/2ebf215f3dd15bb4b2fcf295e4c4bbc003b603d7.jpg?v=1574180257"},{"product_id":"parallelguidesysteminsystainer","title":"Woodpeckers - Parallel Guide System with Systainer","description":"\u003cp\u003eEveryone who has wrangled a full sheet of plywood around a table saw immediately recognizes the advantages of track saws for breaking down sheet goods. Keeping the unwieldy sheet stationary and moving the saw down a precision-made rail makes a lot of sense, but how do you get two (or more) pieces to come out exactly the same width?  Just like the rip fence on a table saw, Woodpeckers new Parallel Guide System takes measuring and marking out of the equation and uses a physical reference to ensure your last cut is exactly the same as your first. The Parallel Guide System locks onto your Festool, Makita or Triton guide rail and instantly aligns the cutting line parallel to, and a specific distance from, the edge of your stock.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Parallel Guide System\u003c\/strong\u003e starts with Woodpeckers Dual Purpose Track. The T-track connects to your saw’s guide rail with a precision-machined bracket that locks in square and secure. With two T-tracks locked to your guide rail, all you have to do is set the zero side-play flip stops to the same dimension, position the stops on the edge of your work and make your cut. Repeat as often as needed…every piece will be exactly the same.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe Parallel Guide System\u003c\/strong\u003e shines when working on large cabinet or furniture panels, but what about smaller pieces? They've got that under control, too. Add the Narrow Stock Guides, use the scale on the edge instead of the top, and now you can rip stock from 10-1\/2\" down to just a fraction of an inch. This feature is really great when you’re on a job site without a table saw and need to make some frame stock immediately, or if your shop space is so limited a table saw is out of the question.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe T-tracks come in sections. Use all of them or just the ones you need. Fully assembled, you can rip up to 52\" – well beyond the center of a sheet of plywood. But, when working normal cabinet components, you’ll only need a couple sections assembled, while the rest is tucked securely in its Systainer and out of your way. The ends are precisely cut to ensure the connected sections are perfectly straight and the scale calibrations are accurate.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eHere’s What You Get.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Main Body Brackets to attach the Parallel Guide System to your saw’s guide rail.\u003c\/li\u003e\n\u003cli\u003eFour (4) Flip Stops (two on each track lets you cut at two dimensions without resetting).\u003c\/li\u003e\n\u003cli\u003eEight (8) laser engraved, precision-machined, Dual Purpose Tracks with inch or metric scales.\u003c\/li\u003e\n\u003cli\u003eSix (6) T-Track Connectors.\u003c\/li\u003e\n\u003cli\u003eTwo (2) Narrow Stock Guides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003eAll packed carefully in a Systainer case with a custom designed foam liner.\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/v9-G6MMzTRs\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Imperial","offer_id":31858120884293,"sku":"WOODPECKERS-PGSI-WSYS-19","price":721.95,"currency_code":"CAD","in_stock":false},{"title":"Metric","offer_id":31858120917061,"sku":"WOODPECKERS-PGSM-WSYS-19","price":721.95,"currency_code":"CAD","in_stock":false},{"title":"PGS Track Set - Imperial","offer_id":40115849265221,"sku":"WOODPECKERS-PGS-ITRK-19","price":108.95,"currency_code":"CAD","in_stock":false},{"title":"PGS Track Set - Metric","offer_id":40115849199685,"sku":"WOODPECKERS-PGS-MTRK-19","price":108.95,"currency_code":"CAD","in_stock":false},{"title":"PGS Flip Stops - Pair","offer_id":40115849134149,"sku":"WOODPECKERS-PGS-STOPS-19","price":80.95,"currency_code":"CAD","in_stock":false},{"title":"PGS Track Connectors - 6pc Set","offer_id":40115849297989,"sku":"WOODPECKERS-PGS-CONN-19","price":90.55,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/433bf8ff0ec4d9b1cbeb45bc4f4be1b4eaa7dc64.jpg?v=1600791442"},{"product_id":"sawgauge","title":"Saw Gauge 2.0","description":"\u003cp\u003eAdjusting the alignment between the blade and the miter slot of your table saw is the single most important thing you can do to improve your woodworking. The next item on that list is adjusting your rip fence to be parallel to the miter slot. With the miter slot, rip fence and blade all parallel to each other, your table saw is ready to deliver accurate cuts. Woodpeckers new Saw Gauge 2.0 makes those adjustments easier and more accurately than any other tool on the market. What sets Woodpeckers Saw Gauge 2.0 apart from the rest is the method of registering the gauge in the miter slot.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAfter-market table saw accessories have always faced the same dilemma; miter gauge slots vary widely by both design and manufacturing tolerance. Woodpeckers founder, Rich Hummel, solved the problem (and received a patent for it) while working on the original Saw Gauge. By dropping two small polished pins in the bottom of the slot and placing a larger pin between them, the middle pin stays precisely centered regardless of the miter slot width or any deviation from end to end. It doesn’t matter what kind of saw -- old, new, American legend, European masterpiece or Asian import -- if the slot is in the neighborhood of 3\/4\", Woodpeckers Saw Gauge 2.0 registers precisely on the center of the miter slot.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eJust drop the pins in the miter slot, adjust the arm so the dial indicator just kisses the saw blade and check it at the front and back of the blade. It’s that easy. The “2.0” part comes next. While Woodpeckers original Saw Gauge uses the same slot location method, it has a maximum reach of 6-1\/2 inches. In version 2.0, the arm that holds the dial indicator can be extended.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe basic arm of Saw Gauge 2.0 has a little over 5 inches of travel…just right for miter slot to blade measurements. Add the extension and you can check your rip fence for parallel up to 20 inches away from the miter slot. Check at several different points along the travel of the fence and you have just confirmed that the rip fence rail is perpendicular to the miter slot. The extra-long, tight-tolerance track connectors ensure that the arm is rigid and straight.\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003eVideo\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/9_pB9gAOJ4g\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Saw Gauge","offer_id":31924534149189,"sku":"SG2-WP","price":349.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/101cb20b81380421d3fac1f65d8e7db16625a86b.jpg?v=1603829725"},{"product_id":"precision-taper-jig","title":"Precision Taper Jig","description":"\u003cp\u003e\u003cstrong\u003eThe hinged taper jig\u003c\/strong\u003e has occupied a spot in the arsenal of small shop furniture makers since table saws were invented. It’s use probably peaked during the 1950s and 1960s when “Mid-Century Modern” was born and tapered legs adorned almost every new piece of furniture. Until now, no one has put much thought into making the taper jig more versatile or more accurate. That’s about to change. 21st Century materials and manufacturing techniques have been applied to this 120-year-old tool to produce a taper jig that offers instantly repeatable quarter-degree angle setting, material clamping, zero-clearance material support and length capacity that can extend up to 48\". Woodpeckers introduces the Precision Taper Jig.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSetting the angle of the Precision Taper Jig\u003c\/strong\u003e couldn’t be easier. A scale with interlocking teeth sets the angle precisely in quarter-degree increments from 0° to 7°. For larger angles, you can switch to the other scale which goes from 0° to 15° in half-degree increments. Should you need to change the angle, the interlocking teeth assure perfect alignment when you need to return. Of course, you can lock the jig at any intermediate angle, as well.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEveryone who has used a normal taper jig\u003c\/strong\u003e to cut furniture legs knows there’s a moment of high anxiety at the end of the cut. You’re working close to the blade, there’s not much material left and that wonky angle doesn’t lend itself to using push sticks or featherboards. But the Precision Taper Jig is different. There’s a sacrificial MDF sled on the bottom and quick-release clamps riding in the extrusion tracks. Your workpiece is held down to the sled, rather than against the table of your saw. The sled also eliminates any worry about bottom-side tear-out. With a clamping range from 3\" down to just 17\/32\", the clamps work on just about any tapered project and the clamping handles serve double-duty as convenient gripping points for pushing the jig.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor wider stock\u003c\/strong\u003e, you have two choices. You can make a sacrificial sled the same size as your workpiece or you can remove the sled and use the Precision Taper Jig riding straight on the table like all the rest. It’s your choice.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIf you need more than the 32\"\u003c\/strong\u003e capacity of the standard Precision Taper Jig, you can expand it to 48\". Even better, if you buy the standard unit now and take on a project that’s over 32\" a year from now, the extension kit can be added at any time.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThere’s never been a taper jig\u003c\/strong\u003e with all these features; capacity that can extend from 32\" to 48\" in a matter of minutes, quarter-degree angle resolution that’s instantly repeatable, material clamping and zero-clearance support. This is a handsome, well-built tool that you’ll be proud to have in your shop. It’s designed and built to serve generations of woodworkers to come.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLike all Woodpeckers products\u003c\/strong\u003e, the Precision Taper Jig is precisely machined and carefully inspected in their Strongsville, Ohio factory (just south of Cleveland).\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Df6uJ4pyhzo\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"48\" Precision Taper Jig","offer_id":39854587379781,"sku":"PTJ-48","price":699.95,"currency_code":"CAD","in_stock":false},{"title":"32\" Precision Taper Jig","offer_id":39854587412549,"sku":"PTJ-32","price":499.95,"currency_code":"CAD","in_stock":false},{"title":"Extension Kit","offer_id":39854587445317,"sku":"PTJ-EXT","price":232.6,"currency_code":"CAD","in_stock":true},{"title":"Clamping Handle","offer_id":39854587478085,"sku":"PTJ-CH","price":83.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/taper-jig-01.png?v=1646413622"},{"product_id":"woodpeckers-iron-grip-coping-sled","title":"Woodpeckers - Iron-Grip™ Coping Sled","description":"\u003cp\u003e\u003cstrong\u003eRunning the narrow end of a workpiece\u003c\/strong\u003e through a router table can be a stresfful task. There just isn't enough material to reach the outfeed fence before you leave the infeed fence. The bearing on the bit is only so much help...it needs two points of contact to keep the cut straight. That's why you need an Iron-Grip Coping Sled for your router table when you're making cope and stick door frames, bridle joints, tenons, half-laps and other end-of-board cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers new Iron-Grip Coping Sled\u003c\/strong\u003e improves on our ever-popular original Coping Sled and beefs it up with a stiffer base, larger fence guide and the Iron-Grip clamp (\u003cem\u003ewhich gives you two points of contact but only one knob\u003c\/em\u003e). It's the stiffest, flattest and most secure coping sled on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe foundaction of the Iron-Grip\u003c\/strong\u003e Coping Sled is a precision-machined anodized aluminum base milled from cast and ground tool plate - the most stable aluminum material on the market. Four UHMW glide strips are added to the bottom of the 11-1\/2\" square base to minimize friction and keep the Iron-Grip moving smoothly. What you won't find on the bottom of the base is a bar to fit in a miter gauage slot. It doesn't need one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstead of guiding off the miter guage track\u003c\/strong\u003e, the Iron-Grip Coping Sled guides off the fence. This eliminates the tedious job of aligning the fence perfectly parallelt to the track. Just get the fence aligned to the bearing of the router bit, align the fence guide on the coping sled to the fouter table fence and you're good to go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe crystal-clear fence guide\u003c\/strong\u003e is 3\/8\" thick and 15-1\/2\" long, making it ideal to work with any router table fence, whether it's a Woodpeckers fence, another brand or one you've built yourself...it handles them all (\u003cem\u003eneeds to be at least 3\" tall\u003c\/em\u003e). With 3\" of depth adjustment, it can even handle the deep tenon cuts needed on entry doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers has taken a \"belt and suspenders\" approach\u003c\/strong\u003e to securing your work to the Iron-Grip Coping Sled. First, an adjustable top plate captures your work against the rigid back fence, preventing rotational movement. Second, coming down from the top, the new Iron-Grip stainless spring steel clamp gives you two points of contact with only one knob to adjust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe clamp slides effortlessly right or left\u003c\/strong\u003e to position the clamping pads right where you need them. Once adjusted to the thickness of your stock, it takes less than one full turn of the knob to release the stock and slide in the next piece. It's faster than a pair of toggle clamps and won't distort your sled the way toggle clamps do. The adjustable plate accomodates stock up to 5-3\/4\" wide and the Iron-Grip clamp holds stock up to 1-3\/4\" thick.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe newly designed back fence\u003c\/strong\u003e has a T-slot to mount a sacrificial backer. The backer prevents blow-out where the router bit exits your stock. Just chop the end off and slide the piece forward when you change projects. You'll get three MDF backer boards with your Iron-Grip. When they're gone you can make your from scraps or we offer them in convenient 3-packs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products\u003c\/strong\u003e, the Iron-Grip Coping Sled is precisely machined and carefully inspected in their Strongsville, Ohio, manufacturing facility (just south of Cleveland).\u003c\/p\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nlrSEAzJrVo\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Iron-Grip Coping Sled","offer_id":39898203029573,"sku":"WOODPECKERS-IGCS","price":498.45,"currency_code":"CAD","in_stock":false},{"title":"Iron-Grip Clamp Upgrade for COPESLED1","offer_id":39898203062341,"sku":"WOODPECKERS-IGCS-UG","price":166.15,"currency_code":"CAD","in_stock":false},{"title":"Sacrificial Backer (3 pack)","offer_id":39898203095109,"sku":"WOODPECKERS-IGCS-SB","price":18.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/woodpeckers-iron-grip-coping-sled.jpg?v=1648131308"},{"product_id":"exact-90-miter-gauge","title":"Exact-90 Miter Gauge","description":"\u003cp\u003e\u003cstrong\u003eNo matter how cleverly engineered\u003c\/strong\u003ea table saw might be, it always seems like the miter gauge was an after-thought. The ones that come with new saws are typically barely usable, and most after-market miter gauges assume the miter slots in the tables are straight and uniform (spoiler alert: they're not). So, their engineers set out to develop a new type of miter gauge. A miter gauge that reliably performs the one job woodworkers need most from it, a perfectly square cut, and can do it regardless of how sloppy the machining of the miter slot. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe first thing you'll notice about the new Exact-90\u003c\/strong\u003e is what's missing. There's no complicated, accuracy compromising mechanics for setting unneeded angles. There's no protractor, no pins, no springs...just a rock solid, billet-machined aluminum head locked in perfectly square to the miter bar. The Exact-90 Miter Gauge cuts one angle and one angle only...90°. That's right, a miter gauge that is permanently calibrated to cut perfectly square every time. Let's face it, with rare exception, the cuts you need done perfectly on your table saw are 90° cuts. Doing this with a miter gauge designed to be set to different angles inevitably involves design compromise, so Woodpeckers didn't do it. From the ground up every variable that could affect precision of the Exact-90 has been engineered and machined to deliver one thing...a perfect 90°.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe perfect 90° cut starts\u003c\/strong\u003e with the miter bar. There was a time when the machining of the miter gauge slot in a table saw was held to strict tolerance. The slots were smooth and precisely ground and they were mater with longer, more precisely milled miter bars. Sadly, that's not the case today. Now a typical miter slot varies in width from end-to-end and has a rough texture that doesn't lend itself to precision. And even if you're lucky enough to have one of the precisely machined saws from the middle of the last century, chances are the slow has worn some of the years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThat's why much of Woodpeckers engineering focused\u003c\/strong\u003e on building a miter bar that can overcome the limitations of a poorly-machined or time-worn miter slot. Their new patent-pending design has 5 specially-designed nylon leaf springs built into the edge of the miter bar. These springs automatically adapt to either undersized or oversized miter slots...no adjustments needed. Even if the slot varies in width from end to end (and it probably does), the springs expand and contract to keep the right edge of the bar perfectly tight against the miter slot wall. To complement the leaf springs, they made the bar 25-1\/2\" long, the longest on the market. This improves accuracy by spanning inconsistencies in the miter slot and increases your crosscut capacity to 24\" on most 10\" table saws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf your saw has a T-track\u003c\/strong\u003e miter slot, the Woodpeckers Miter Bar has two T-washers, not just one, giving you extra support when making wide cross-cuts. No T-track? No problem. The T-washers come off with simple counter-sunk screws. Bottom line? If your miter slot is anywhere close to 3\/8\" x 3\/4\" the Exact-90 will fit. The leaf spring feature easily accomodates miter slots from .742\" to .765\" wide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfectly square is great\u003c\/strong\u003e, but accurately controlling the length of your stock is critical, too. The Exact-90 includes a newly designed fence with an easy-to-read scale right on top. The fence houses an extension that slides out to take the flip stop all the way to 45 inches. Speaking of the flip stop, its new design lets you dial in the position of the flag with finger-tip control...no tapping or nudging. And, none of the adjustments on the fence, flip stop or extension...no searching for lost Allen wrenches. Also, there's a sacrificial fence which can be used to reduce tear-out and fully support your material all the way through the blade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStop the Flop. \u003c\/strong\u003eWe've all experienced miter gauge flop...you pull the miter gauge and your wide workpiece back, the miter gauge head leaves the front edge of the table and the head and fence flop to one side. Well...that's over. The Exact-90 includes the new patent pending Flip Stop. Just drop it on top of your wide stock, lock it and the stock supports the fence when the miter gauge is off the table. No more catching the back fence on the front edge of your table and ruining your cut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you're through chasing square\u003c\/strong\u003e cuts with your current miter guage. Woodpeckers Exact-90 is the perfect solution for your shop. More cross-cut capacity, more fence extension, a patent pending, adjustment-free miter bar, improved support for extra-wide stock and Dead. Square. Cuts. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers products\u003c\/strong\u003e, the Exact-90 Miter Gauge is precisely machined and carefully inspected in their Strongsville, Ohio manufacturing facility. \u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Exact-90 Miter Gauge","offer_id":40000698286149,"sku":"E90","price":498.45,"currency_code":"CAD","in_stock":false},{"title":"25-1\/2\" Miter Bar","offer_id":40000698318917,"sku":"E90-MB","price":116.3,"currency_code":"CAD","in_stock":false},{"title":"Exact-90 Flip Stop","offer_id":40000698351685,"sku":"E90-FS","price":49.85,"currency_code":"CAD","in_stock":false},{"title":"Exact-90 Sacrificial Fence","offer_id":40000698384453,"sku":"E90-SF","price":16.6,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/90-01.png?v=1649782548"},{"product_id":"woodpeckers-stealthstop","title":"Woodpeckers - StealthStop","description":"\u003ch2\u003eMiter Saw Fence \u0026amp; Stop System\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThere's a \"light bulb moment\"\u003c\/strong\u003e in most woodworkers' careers when they figure out that cutting a line can never be as quick or as consistent as cutting to a stop. Then the pursuit begins for the \u003cstrong\u003eperfect\u003c\/strong\u003e stop. Everyone wants a stop that's easy to set, doesn't move, and can flip out of the way without losing position. Add in the ability to make very fine adjustments, and you've got what most woodworkers would call an ideal stop. Now, make it simple to adapt to almost any miter saw and you have Woodpeckers newest tool, the StealthStop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStealthStop is a new patent-pending micro-adjustable flip stop\u003c\/strong\u003e that is designed to work within the miter gauage slot of their Combo Track. StealthStops glide up and down the track effortlessly and lock firmly with a simple twist of a hex key. When folded down, the stop is completely contained within the slot. Flip it out and it locks square to the track and rigidly in place. The micro-adjuster thumbwheel allows you to fine tune the position of the stop with precise control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHaving a great stop doesn't do you a lot of good\u003c\/strong\u003e if adapting it to your saw is so complicated it never gets done. That's why they went further and designed three simple-to-install configurations. You can mount the track veritcally, flush mount it horizontally or stack a vertical track on top of a horizontal track. The stacked option gives you something no other stop system can deliver...stops very close to each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWoodpeckers specially designed brackets\u003c\/strong\u003e link the horizontal track to the vertical track at 90° to each other. Now you can have stops in both fences, letting you locate two stops within a fraction of an inch of each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you don't need stops close together\u003c\/strong\u003e, you can mount a single track vertically or embed it into the surface of your table. The vertical mount is the easiest and most familiar - it looks like an ordinary back fence. The installation brackets slide into the back of the track and then screw down to your work surface. The bracket is also designed to be a convenient storage point for the provided 1\/8\" screwdriver-handled hex key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor the horizontal flush mount\u003c\/strong\u003e, you can rout a 1\/2\" deep groove in your work surface. Or, for a simpler approach that doesn't involve cutting your table, mount the track on top of the work surface and butt 1\/2\" plywood up to both sides of the track, creating the same flush surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe main components of the StealthStop\u003c\/strong\u003e are injection-molded with glass-reinforced polycarbonate. All the internal components are either stainless or zinc-plated. The micro-adjust thumbwheel is turned from brass. It's all low maintenance and rust resistant. Woodpeckers offer seperate single-track kits for the right and left side of your saw (the tape reads from left-to-right or right-to-left). The same goes for the stacked track packages...there's one for the right and one for the left. The single-track kits include one 4' track, five mounting brackets, two stops, a combination inch\/metric tape, a 1\/8\" screwdriver-handled hex key and mounting hardware. The stacked track kits have all the same components plus a second 4' track and two more stops.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLike all Woodpeckers tools, the StealthStop\u003c\/strong\u003e is precisely built and carefully inspected in their Strongsville, Ohio factory (just south of Cleveland). \u003c\/p\u003e\n\u003ch5\u003eOptions\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4' Kit - Combination Left (SS4K-CL)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e2 X 4' pieces of engraved track\u003c\/li\u003e\n\u003cli\u003eStealthStop Mounting Bracket Kit\u003c\/li\u003e\n\u003cli\u003eStealthStop Wrench Kit\u003c\/li\u003e\n\u003cli\u003e4 x StealthStops\u003c\/li\u003e\n\u003cli\u003e12' right to left combination scale\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4' Kit - Combination Right (SS4K-CR)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e2 X 4' pieces of engraved track\u003c\/li\u003e\n\u003cli\u003eStealthStop Mounting Bracket Kit\u003c\/li\u003e\n\u003cli\u003eStealthStop Wrench Kit\u003c\/li\u003e\n\u003cli\u003e4 x StealthStops\u003c\/li\u003e\n\u003cli\u003e12' left to right combination scale\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4' Kit - Fence Left (SS4K-FL)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e4' piece of engraved track\u003c\/li\u003e\n\u003cli\u003eStealthStop Mounting Bracket Kit\u003c\/li\u003e\n\u003cli\u003eStealthStop Wrench Kit\u003c\/li\u003e\n\u003cli\u003e2 x StealthStops\u003c\/li\u003e\n\u003cli\u003e12' right to left combination scale\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e4' Kit - Fence Right (SS4K-FR)\n\u003cul\u003e\n\u003cli\u003e4' piece of engraved track\u003c\/li\u003e\n\u003cli\u003eStealthStop Mounting Bracket Kit\u003c\/li\u003e\n\u003cli\u003eStealthStop Wrench Kit\u003c\/li\u003e\n\u003cli\u003e2 x StealthStops\u003c\/li\u003e\n\u003cli\u003e12' left to right combination scale\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealthStops 2 pack (SSX2)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e2 assembled StealthStop Flip Stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealthStop Mounting Bracket Kit (SSMTGX4)\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e4 mounting brackets\u003c\/li\u003e\n\u003cli\u003e16 - 10-32 x 3\/8 Button Head Cap Screw\u003c\/li\u003e\n\u003cli\u003e16 - 10-32 Weld Nuts\u003c\/li\u003e\n\u003cli\u003e4 - #10 x 1 Wood Screw\u003c\/li\u003e\n\u003cli\u003e4 - #10 SAE Washer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCombo Track 32\" (CT32)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCombo Track 48\" (CT48)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nDtnODTRRBo\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"4' Kit - Combination Left","offer_id":40118454714437,"sku":"WOODPECKERS-SS4K-CL","price":285.95,"currency_code":"CAD","in_stock":false},{"title":"4' Kit - Combination Right","offer_id":40118454747205,"sku":"WOODPECKERS-SS4K-CR","price":285.95,"currency_code":"CAD","in_stock":false},{"title":"4' Kit - Fence Left","offer_id":40118454779973,"sku":"WOODPECKERS-SS4K-FL","price":185.95,"currency_code":"CAD","in_stock":false},{"title":"4' Kit - Fence Right","offer_id":40118454812741,"sku":"WOODPECKERS-SS4K-FR","price":185.95,"currency_code":"CAD","in_stock":false},{"title":"StealthStops (2 pack)","offer_id":40118454878277,"sku":"WOODPECKERS-SSX2","price":49.95,"currency_code":"CAD","in_stock":false},{"title":"Mounting Bracket Kit (4)","offer_id":40118454911045,"sku":"WOODPECKERS-SSMTGX4","price":45.95,"currency_code":"CAD","in_stock":false},{"title":"Combo Track 32\"","offer_id":40118454943813,"sku":"WOODPECKERS-CT32","price":39.95,"currency_code":"CAD","in_stock":false},{"title":"Combo Track 48\"","offer_id":40118454976581,"sku":"WOODPECKERS-CT48","price":53.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/stealthstop-01.png?v=1654534727"},{"product_id":"align-a-saw-system","title":"Align-A-Saw System","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWoodpeckers Align-A-Saw System\u003c\/strong\u003e knocks down the roadblock that stand between you and a dialed-in table saw. Even the best saw blades are only held to a flatness tolerance of + or - .005\", the teeth get in the way when you're trying to measure and the distance between front and rear measurements is just too short. The massive 3\/8\" thick, solid steel \u003cstrong\u003eAlign-A-Saw Plate \u003c\/strong\u003eis surface ground to a flatness tolerance of .002\" and extends the distance from front to rear to a generous 12\"...about 50\" more available front-to-back distance and no teeth to work around. The stainless steel \u003cstrong\u003eAlign-A-Saw Gauge\u003c\/strong\u003e is a square engineered specifically for setting up your table saw. It's thin profile helps you see even tiny misalignments, steps over the table insert area so there's no interference and is held square to the blade by a stand that fits in the miter gauge slot. The Plate and Gauge together give you an ideal reference to set square and 45°. Pair the Align-A-Saw Plate with Woodpeckers Saw Gauge and you'll have the perfect set-up for aligning your saw arbour and table.\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Align A Saw","offer_id":40581858984005,"sku":"AAS-Set","price":425.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/7_6f4abf77-14cc-426e-a951-b936251797ea.jpg?v=1685370720"},{"product_id":"adjustable-setup-block","title":"Adjustable Setup Block","description":"\u003cstyle\u003e\u003c!--\nred {\n  color: white !important;\n  background-color: #7f241c;\n  padding: 10px;\n  border-radius: 5px;\n  font-style: italic;\n}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cstrong\u003eA physical reference representing your critical dimension\u003c\/strong\u003e leads to more accurate machine set-ups than trying to adjust to a scale. Lots of woodworkers use sets of blocks for this task, but Woodpeckers newest OneTime Tool, the Adjustable Setup Block, is one single device that adjusts to any dimension between 1\/64\" up to 1-3\/16\". Just use the easy-to-read scale to position the reference surface and dial in your cutter height or fence position. Use your sense of sight and touch to deliver the perfect settings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick-adjustment and locked-in precision.\u003c\/strong\u003e It’s just three steps to your precise dimension with the Adjustable Setup Block. Depress the quick-adjust button and slide the reference surface up or down until it’s close. Use the micro-adjust to dial in your exact dimension, then tighten the locking knob. It’s that easy.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision doesn’t stop at sixteenths.\u003c\/strong\u003e 1\/64\" doesn't look like much, until it’s a gap in your joint...then it looks like the Grand Canyon. But working to 64ths using a standard scale can challenge even the most \"eagle-eyed\" among us. The ramped design of the Adjustable Setup Block spaces out the graduations over 2-1\/2 times. It's not magic, it’s geometry, but it will feel like magic in your shop when you can start dialing in machine set-ups in less time and to a much higher level of precision. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo scales provide multiple applications.\u003c\/strong\u003e The “TOP” scale measures the distance from the bottom of the base to the top of the reference plate. You can use that to set the distance between the bottom of a drill bit and table of your drill press. The “BOTTOM” scale measures the distance from the bottom of the base to the bottom face of the reference plate. It’s perfect for adjusting the height of a bit in your router table or the depth of cut on your table saw. The reference plate extends away from the body of the tool, giving you lots of alignment options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn attractive tool with a quality you can feel.\u003c\/strong\u003e The triangular base and reference plate are meticulously machined from a solid billet of aluminum, then anodized with our famous “Woodpeckers Red” finish. Stainless-steel inlays with an old-school jeweled finish provide a handsome contrast. The adjusting and locking hardware parts are all turned on Woodpeckers Swiss lathes from high grade stainless steel. The scales are laser engraved to a tolerance of .004\" total accumulated error. This handy physical reference tool will simplify all your machinery set-up and fit comfortably in the pocket of your shop apron.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConvenient Storage.\u003c\/strong\u003e The Adjustable Setup Block includes a wall-mountable Rack-It, to keep your tool well protected, but always in plain sight.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZEVeF0AWv1I\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":40581887721541,"sku":"ADJSU-I-23","price":399.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/1_60ba746a-a732-4bdc-a2d2-432ba636c38b.jpg?v=1685373657"},{"product_id":"spline-jig","title":"Spline Jig","description":"\u003cp\u003e\u003cb\u003eStrengthen your miter joints with Woodpeckers new Spline Jig.\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eA normal mitered corner lacks the long-grain to long-grain contact needed for a strong joint. Since it isn't completely end-grain to end-grain, it will usually hold together for a while, but it's weak and probably won't survive seasonal changes.  You can make the joint rock solid and add a design element at the same time by adding splines across the miters. Woodpeckers Spline Jig makes it simple to add splines to all kinds of mitered joints using either your table saw or router table. Just set the stops to position the cut where you want to add a spline, drop your pre-glued miter project in the jig and make the cut. Glue in the spline and just that quickly, you've made an attractive joint that will last for generations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eWoodpeckers Spline Jig starts with two sections \u003c\/b\u003eof our Super Track. The powder-coated steel legs hold the tracks square to each other at two different height settings. The wider setting allows your project to ride just barely above the machine table. It's perfect for projects as narrow as 1\/2 \" and up to 16\" wide. When your project exceeds 16\", just move the tracks inward to the alternate position and now you can add splines to your long projects.      \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eUHMW glide strips line\u003c\/b\u003e the bottoms and edges of the legs, reducing friction and protecting your machine's table and fence from scratches. Just position your fence to put the kerf where you want it, keep a little pressure against the fence and guide your project through the saw blade. There's no simpler way to add strength and stability to your joinery.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eTo jazz up your spline joints \u003c\/b\u003ewith either wider splines or dovetail splines, move to your router table. Now you can use straight bits to cut spline slots 1\/4\", 3\/8\", 1\/2\" or larger. Install a dovetail bit to give your projects the classic look of dovetails. Cut the matching spline stock in two passes using the same bit. For a bold look, make your splines from stock that contrasts with the box material. Or, be subtle and use the same species…then see how long it takes people to figure out they're not regular dovetails!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eLike all Woodpeckers products, the Spline Jig \u003c\/b\u003eis precisely machined and carefully inspected in their Strongsville, Ohio facility just south of Cleveland. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eVideo\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Mst7EI4Q8Ig\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":40595377586245,"sku":"SPLINE-23","price":289.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/products\/1_2fa4b27d-4661-46b3-8ef9-2e0c4bff1958.jpg?v=1688052016"},{"product_id":"stealthstop-mitre-gauge","title":"StealthStop Mitre Gauge","description":"\u003ch2\u003e\u003cspan\u003eWoodpeckers StealthStop Miter Gauge\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eWoodpeckers StealthStop Miter Gauge \u003c\/span\u003e\u003c\/strong\u003etakes your crosscutting and mitering accuracy to another level without breaking the bank. It starts with the leaf-spring miter bar that ensures a perfect fit regardless of how sloppy your miter slot is. Next you’ll find laser-accurate positive stops at 0°, 15°, 22-1\/2°, 30°, 36°, 45° and 60° in both directions. The large, easy-to-read laser-engraved protractor simplifies setting those “in-between” angles, too. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe StealthStop Miter Gauge \u003c\/strong\u003e\u003cspan\u003eis available with or without the extendable fence and stop. The fence gives you 20-1\/2\" of continuous support, which extends to 29\". The StealthStop adjusts anywhere along the fence for repetitive cutting. The stop can be dialed in to perfect position with its built-in micro-adjuster and folds completely out of the way when not needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eLeaf-Spring Miter Bar\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eMost after-market miter gauges include some sort of system to adjust for the width of your miter slot. But none of them compensate for a slot that varies and all of them are rubbing the side of the miter slot with something that wears and has to be readjusted. Woodpeckers patented leaf-springs expand and contract with variations in the slot and will for decades of heavy use. The bar slides smoothly through any slot, with no rattle or slop. If your saw has a T-track miter slot, the StealthStop Miter Bar has two track retainers, not just one, giving you extra support when making wide cross-cuts. No T-track? No problem. The T-washers come off with simple counter-sunk screws. Bottom line? If your miter slot is anywhere close to 3\/8\" x 3\/4\" the StealthStop Miter Gauge will fit. The leaf spring feature easily accommodates miter slots from .742\" to .765\" wide.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eStealthStops\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThere’s a “light bulb moment” in most woodworkers’ careers when they figure out that cutting to a line can never be as quick or as consistent as cutting to a stop. Woodpeckers designed the StealthStop to pop out and do its job instantly, then disappear completely until it’s needed again. The built-in micro-adjuster gives you pinpoint control over the length of your cut. By swinging out sideways rather than from the top, StealthStops handle mitered cuts better than any other stop you can get. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eAngle Adjustment\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eMany positive angle stops are spring-loaded so they engage as the protractor swings along its arc, catching every time on every stop. The StealthStop Miter Gauge takes a different approach. The stop never engages until you want it to. Just depress the button as you’re approaching your desired angle and it pops in perfectly. No excessive wear on the pin or the locks and fewer annoyances for you. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eTo support your material \u003c\/strong\u003e\u003cspan\u003eall the way through the cut, you can add a sacrificial end block to the fence. They’re available in 3-packs or you can make them yourself. Just add them to the end of the fence with a couple of track nuts. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eLike all Woodpeckers tools, the StealthStop\u003c\/strong\u003e is precisely built and carefully inspected in their Strongsville, Ohio factory (just south of Cleveland). \u003c\/span\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eVideo\u003c\/h5\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8fNOwlaPA4U?si=HoEprycdgCj1ioTS\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Woodpeckers","offers":[{"title":"Default Title","offer_id":41336868667461,"sku":"SSMG","price":179.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/1_738d40d4-f563-40f4-bf25-025486079361.jpg?v=1712859543"},{"product_id":"festool-parallel-guides","title":"Festool - Parallel Guides","description":"\u003ch2\u003e\u003cspan\u003eParallel Side Fence FS-PA\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eFor FS\/2 \u0026amp; FS\/2-KP\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Parallel Guides greatly enhances the capability of the Festool Guide Rail System by providing a faster, easier, smarter way to create consistent rip cuts. The Parallel Guides are the two longer sections and offer consistent rip cuts using two adjustable stops that engage the edge of the material parallel to the cut line. They are adjustable up to 650mm ( 25 19\/32 in). The Parallel Guide can be used with any length Festool FS\/2 guide rail. Includes Parallel Guides only. Parallel Guide Extensions and Guide Rail sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eGreatly enhances the Guide Rail System by providing a faster, easier, smarter way to make consistent rip cuts\u003c\/li\u003e\n\u003cli\u003eAttaches easily and clamps quickly to the guide rail, ensuring secure and consistent cuts\u003c\/li\u003e\n\u003cli\u003eEasy to read scale for cuts up to 650mm ( 25 19\/32 in)\u003c\/li\u003e\n\u003cli\u003eEasily calibrated against the guide rail splinterguard for precise, splinterfree and consistent ripping\u003c\/li\u003e\n\u003cli\u003eFor sawing along the width\u003c\/li\u003e\n\u003cli\u003eFor fixed cuts, can be re-set using the scale and end stop\u003c\/li\u003e\n\u003cli\u003eMounting on the guide rail without the use of tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMax. workpiece width: 650mm (26\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Metric","offer_id":42386598330437,"sku":"495717","price":455.0,"currency_code":"CAD","in_stock":true},{"title":"Imperial","offer_id":42386598363205,"sku":"201182","price":455.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/Screenshot-2025-02-20-172705.png?v=1740090767"},{"product_id":"festool-parallel-guide-extensions","title":"Festool - Parallel Guide Narrow Rip Extensions","description":"\u003ch2\u003e\u003cspan\u003eElongation FS-PA-VL\/F\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003efor FS-PA\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"textelement\"\u003e\n\u003cp\u003eThe Parallel Guide System greatly enhances the capability of the Festool Guide Rail System by providing a faster, easier, smarter way to create consistent rip cuts. The Parallel Guide Extensions connect to the Parallel Guide, enabling narrow rip cuts from 1mm to 195mm (1\/16 in to 7-11\/16 in). The Parallel Guide Extensions must be used in conjunction with the Parallel Guide. The best value is purchasing these two components as a set. Parallel Guide and Guide Rail sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"triangle listelement\"\u003e\n\u003cul class=\"triangle__container\"\u003e\n\u003cli class=\"triangle__element\"\u003e\u003cspan\u003eGreatly enhances the Guide Rail System by providing a faster, easier, smarter way to make consistent rip cuts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"triangle__element\"\u003e\u003cspan\u003eMake narrow repetitive cuts on the near, or short side of the material\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"triangle__element\"\u003e\u003cspan\u003eEasy to read scale for cuts up to 195mm (7 11\/16 in)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"triangle__element\"\u003e\u003cspan\u003eEasily calibrated against the guide rail splinter guard for precise, splinter free and consistent ripping\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"triangle__element\"\u003e\u003cspan\u003eOnly for use with the FS-PA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Festool","offers":[{"title":"Metric","offer_id":42386607112261,"sku":"495718","price":269.0,"currency_code":"CAD","in_stock":true},{"title":"Imperial","offer_id":42386607145029,"sku":"201183","price":269.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0011\/8600\/5039\/files\/Screenshot-2025-02-20-173707.png?v=1740091106"}],"url":"https:\/\/kjpselecthardwoods.com\/collections\/squares-setup.oembed","provider":"KJP Select Hardwoods","version":"1.0","type":"link"}