You are puchasing a full size sheet of 5' x 5' plywood cut into 20" x 30". Baltic Birch plywood is manufactured with a single piece face to ensure light and uniform colour. A few sound tight knots and pin holes are permitted. Open knots and defects are replaced with small oval or round veneer patches before gluing.
Did you know that all 1/8" and 1/4" Baltic Birch has the possibility of cupping/warping? This can happen because of the nature of it being thin and wide. Please see our "Working with 1/8" & 1/4" Tab for specifications and our Return policy.
Dimensions are +/- 1/4" of size listed.
Working with 1/8" & 1/4"
Did you know that all 1/8" and 1/4" Baltic Birch has the possibility of cupping/warping? This can happen because of the nature of it being thin and wide. If and when that happens, this popular product for laser cutters can be accommodated by using simple techniques such as taping it down to a flat surface, or creating a jig that compresses it down flat. We always do our best to hand pick the highest quality pieces, but it’s important to be aware of this possibility when planning materials for your project.
If you require perfectly flat material for your project, we would recommend trying ourTruFlat® Laser Plywoodinstead.
******
For many of our customers working on CNC or Lasers - it should be noted there is an allowable thickness tolerance to consider;
1/8" (3mm) - +0.3mm/-0.4mm
1/4" (6mm) - +0.4mm/-0.5mm
Refunds for this product are subject to a 15% restocking fee as these are cut to order. As well, the customer is responsible for any applicable shipping charges.
I am very happy with the product and supply timing. I am in Michigan and the delivery timing is exceptional.
P
Per Angman (Calgary, CA)
all good
S
Splash (Vancouver, CA)
nicely done
I have a small shop, and no really good way of getting a 5x5 sheet of baltic ply home on my cars roof rack, and it’s nice not to have to break a full sized sheet of ply into smaller pieces in my little shop, so this it was super helpful to just be able to order the smaller sheets from you. The cuts are clean and accurate, and the perfect size for the little projects I’m doing.
This material is a game-changer in the world laser engraving! The quality of the plywood is exceptional, with a perfectly smooth, perfectly flat surface (no surprise here) that makes it a joy to work with. The finish feels a little plastic, but I understand it’s an acrylic coating over the maple fibre, which I love. Even laser-fog burn marks wipe off with a damp cloth — no masking needed. The maple grain is pronounced and it cuts cleanly and sands beautifully. 100% will purchase again.