Plywood

ALL-Birch Plywood
Baltic Birch Plywood
Assorted Plywood
Plywood Circles
Ultra Thin Birch Plywood
Craft MDF Plywood
Craft MDF/HDF
Marine Grade Plywood
Edgebanding

At KJP Select Hardwoods, we carry an assortment of plywood products in Canada. To create plywood, layers of wood veneer are fused together with glue and heat. Each layer is incredibly thin, and the grain direction of the plywood panels alternates with each layer for enhanced stability.

On our website, you can purchase various types of plywood like MDF (medium-density fibreboard), HDF (high-density fibreboard), ultra thin, and more.

When you build with plywood, you’ll appreciate its structural benefits. The layers of veneer will:
- Prevent the wood from shrinking or expanding
- Increase the stability of the plywood
- Make the wood a consistent strength and density throughout

Due to the alternating layers, plywood works really well for a variety of uses. It’s often used to make desks, tables, chairs, and more. Whether you’re looking for a budget-friendly option or one that’s higher-end, we have a wide selection of plywood for you to choose from. If you want to cover the edges of the plywood, we also provide edgebanding products.

Interested in purchasing plywood for your next project? Take a look at the plywood products available on our website.

Great items and great service

All the wood from KJP has been awesome to work with! From cutting to engraving!

The pros and con

I thought I'd write a review for anyone who is debating on purchasing this for their business (and for those that regularly purchase the laser/cnc grade). I originally have always used the baltic birch plywood and this was the first time I've used the all birch plywood

What to like: It's inexpensive compared to the laser cnc grade and if you're doing hobby work I highly recommend it or if you're just starting your business up.

What I didn't like: Like they state in the video, the veneer is thinner than the baltic birch (1/8" thick) which causes some major problems for me. I mainly use this wood for cake toppers, birth announcement, ornaments etc and found that the veneer is much too thin - definitely don't recommend sanding the wood with any sander. Just use a piece of sanding paper if you have to and do it by hand otherwise you'll end up sanding too much and seeing under the veneer and it's not the same colour as the face of the veneer so you'll definitely notice it.

The thin veneer for me is enough to steer me away and I'll be using my remaining pieces on products that aren't directly given to customers. I also found after engraving, if I've masked the wood, the veneer has peeled off around some of the engraving spots.

So, if you're using this wood for light hobby work, or just to try test cuts I highly recommend it. It's the best value you can get.

If you're looking to use this for your business I recommend going to the cnc/laser grade to avoid the frustration of the veneer being too thin.

Also, I wanted to add that using it over the last week I definitely notice a difference in the colour of the engraving. The colour of the engraving on the all birch is darker and not as warm of a tone.

Plywood

Added to your cart:

Let customers speak for us

Country

Country

Plywood

Let customers speak for us