Skip to content

Country

No-Leak Resin Mold

Never worry about spills and leaks again with these reusable Epoxy forms! 

We've all made epoxy forms using plywood and tape - but between the cost, time, and single use - it leaves something to be desired. KJP is happy to finally introduce a reusable HDPE pre-made resin mold that will solve all these problems! These reusable NO-LEAK Molds are designed with the DIY’er and Weekend Warrior in mind; they are very affordable for someone just starting off in the epoxy world.

Simply tap the inside of the sides, turn the form over and tap the back with a mallet and watch your creation pop out of the mold. The sides are fabricated at a 1 degree to allow your project to drop out. 

Place form flat on a work table, do not have it elevated (Blocks, saw horses, clamps). If elevated the form will bow due to the epoxy heating up and expanding the HDPE. These forms are made with a single piece of 1/4” HDPE making it very flexible (sides may not perfectly straight when unboxed, can be straighten out by hand) the sides are 3 “ high and never require sealant. 

  • Welded sides (3" high) to create a tight seal that never requires sealing with silicone
  • Reusable
  • Vaccumed formed
  • HDPE non-stick plastic - no release agent needed!

Don't forget to use our HDPE Clamping blocks to hold down your wood!

Instructions 

1. We always recommend flattening your wood before starting any epoxy project.

2. Place the piece(s) into the form in your desired design/pattern.

3. Secure the wood down using something heavy or use clamps.

4. Mix and pour your epoxy

5. Once your epoxy is fully cured (time depends on epoxy type/brand) flip the form upside down and use a rubber mallet to tap the bottom and middle of side walls to release your pour.

6. That's it! Easy!

Place form flat on a work table, do not have it elevated (Blocks, saw horses, clamps). If elevated the form will bow due to the epoxy heating up and expanding the HDPE.

Type: No-Leak
Size: 10" X 18"
Original price $69.95 - Original price $159.95
Original price
$69.95
$69.95 - $159.95
Current price $69.95
Ordering Information

In-Store Pickup: Most orders are completed within 2 business days. We will contact you via email when your order is ready for pickup.

Shipping: Most orders are packaged and ready for shipping within 2 to 4 business days of ordering.

For more information on Shipping & Returns click here.

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Malek Ali (London, CA)

No-Leak Resin Mold

J
Jack Tackett (Sidney, US)
Worked Great

My first time doing an epoxy poor. The silicone mold worked great and my charcuterie board turned out great. Clean-up was super easy with the mold

J
Josh Woodcock (Toronto, CA)
Great purchase

Very happy with this purchase. Couldn’t find a better price for the size and it hasn’t given me any issues. Will purchase more forms in the future. Thanks KJP