Skip to content
Gift Cards Hours & Location Milling Services Monthly Specials
Amana - 46308 - 3/8" Composite Honeycomb

Amana - 46308 - 3/8" Composite Honeycomb

46308 - Composite Honeycomb (Solid Carbide, 6-Flute)

  • Shank: 3/8"
  • Diameter: 3/8"
  • Cutting Length: 1-1/4"
  • Overall Length: 3"
  • B1: 1/4"
  • Max RPM: 28,000
  • Flutes: 6

Solid carbide honeycomb cutting router bits provide a burr-free top and bottom finish, providing that the workpiece is thicker than 0.250”. Designed for cutting Bioboard™, Falconboard®, Aluminum Honeycomb (AHP) carbon fiber and honeycomb cardboard.

Excellent for cutting
  • Acrylonitrile-Butadiene-Styrene (ABS)
  • Aluminum Honeycomb Panel (AHP)
  • BioBoard™
  • Carbon
  • Carbon Fiber
  • Carbon Graphite
  • Composites
  • Falconboard®
  • Fiberglass Filled Plastics
  • Honeycomb Cardboard
  • Lexan™
  • Unfilled Plastics
Zirconium Nitride (ZrN) Coating

 

  • Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
  • Have the tendency to run/spin much faster than an uncoated tool
  • Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)
  • High flute volume supports high feed rates and chip loads
  • High aspect ratio for single pass deep-reach cutting
  • Flute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites

 

For optimal results and extended tool life use mist lubricant system or air cooling.
Speed and Feed Rate

CNC running parameters based on 1 x Diameter depth per pass:

  • RPM: 18,000
  • Feed Rate: 320 IPM
  • Chip Load per tooth: 0.003"
  • Ramp down Rate: 54 IPM
$152.95 - $152.95
$152.95
$152.95 - $152.95
$152.95

Customer Reviews

Based on 16 reviews
88%
(14)
13%
(2)
0%
(0)
0%
(0)
0%
(0)
M
MDavis (Toronto, CA)
Faulty bit and awful customer service from KJP

Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.

Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.

Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.

Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...

That was very helpful because I wasn't aware you can buy stuff on the internet.

C
Cindy Dupere (Toronto, CA)
Great

Came in on time and in great condition

B
Bob Sparks (Toronto, CA)
Amana spiral compression bit

Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood

123
4905
Verified Reviews

46308 - Composite Honeycomb (Solid Carbide, 6-Flute)

  • Shank: 3/8"
  • Diameter: 3/8"
  • Cutting Length: 1-1/4"
  • Overall Length: 3"
  • B1: 1/4"
  • Max RPM: 28,000
  • Flutes: 6

Solid carbide honeycomb cutting router bits provide a burr-free top and bottom finish, providing that the workpiece is thicker than 0.250”. Designed for cutting Bioboard™, Falconboard®, Aluminum Honeycomb (AHP) carbon fiber and honeycomb cardboard.

  • Acrylonitrile-Butadiene-Styrene (ABS)
  • Aluminum Honeycomb Panel (AHP)
  • BioBoard™
  • Carbon
  • Carbon Fiber
  • Carbon Graphite
  • Composites
  • Falconboard®
  • Fiberglass Filled Plastics
  • Honeycomb Cardboard
  • Lexan™
  • Unfilled Plastics

 
  • Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
  • Have the tendency to run/spin much faster than an uncoated tool
  • Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles)
  • High flute volume supports high feed rates and chip loads
  • High aspect ratio for single pass deep-reach cutting
  • Flute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites

 

 For optimal results and extended tool life use mist lubricant system or air cooling.

CNC running parameters based on 1 x Diameter depth per pass:

  • RPM: 18,000
  • Feed Rate: 320 IPM
  • Chip Load per tooth: 0.003"
  • Ramp down Rate: 54 IPM