Skip to content

Country

15" x 30" Baltic Birch Plywood

Our top selling plywood pre-cut for you!

Baltic Birch plywood is manufactured with a single piece face to ensure light and uniform colour. A few sound tight knots and pin holes are permitted. Open knots and defects are replaced with small oval or round veneer patches before gluing.

Did you know that all 1/8" and 1/4" Baltic Birch has the possibility of cupping/warping? This can happen because of the nature of it being thin and wide. Please see our "Working with 1/8" & 1/4" Tab for specifications and our Return policy.

Dimensions are +/- 1/4" of size listed.

Thickness: 1/8" (3mm) Laser/CNC Grade
Original price $5.95 - Original price $6.95
Original price
$5.95
$5.95 - $6.95
Current price $5.95

Customer Reviews

Based on 441 reviews
85%
(377)
7%
(29)
5%
(22)
2%
(8)
1%
(5)
A
Are (Sainte-Marthe, CA)
Impressed

I placed a small initial order because I wanted to see the quality before ordering more. Very impressed and will be ordering more by end of week. Looking forward to trying some of the other products (walnut hopefully)

R
Ron Mill (Vancouver, CA)
Good plywood for my cratfs

This plywood was just as ordered and expected.

K
Katherine Douglas (Trenton, CA)
Will buy again.

Surfaces smooth and pieces flat. Thumbs up!👍

Our top selling plywood pre-cut for you!

Baltic Birch plywood is manufactured with a single piece face to ensure light and uniform colour. A few sound tight knots and pin holes are permitted. Open knots and defects are replaced with small oval or round veneer patches before gluing.

Did you know that all 1/8" and 1/4" Baltic Birch has the possibility of cupping/warping? This can happen because of the nature of it being thin and wide. Please see our "Working with 1/8" & 1/4" Tab for specifications and our Return policy.

Dimensions are +/- 1/4" of size listed.

Did you know that all 1/8" and 1/4" Baltic Birch has the possibility of cupping/warping? This can happen because of the nature of it being thin and wide. If and when that happens, this popular product for laser cutters can be accommodated by using simple techniques such as taping it down to a flat surface, or creating a jig that compresses it down flat. We always do our best to hand pick the highest quality pieces, but it’s important to be aware of this possibility when planning materials for your project.

If you require perfectly flat material for your project, we would recommend trying our TruFlat® Laser Plywood instead.

******

For many of our customers working on CNC or Lasers - it should be noted there is an allowable thickness tolerance to consider;

  • 1/8" (3mm) - +0.3mm/-0.4mm
  • 1/4" (6mm) - +0.4mm/-0.5mm

Refunds for this product are subject to a 15% restocking fee as these are cut to order. As well, the customer is responsible for any applicable shipping charges.