Products

Expans. anchor SV-SA D14/32 201349 32 Expansion Anchors for permanent placement. Break through the limits of shop-built pieces and on-site construc...

Finish Delta Sander DTS 400 REQ-Plus  577520 A great all around sander, the DTS 400 is designed for fine sanding small, angular surfaces that are...

Sandpaper Abrasives STF DELTA/9 GR/10 For DTS 400, DTSC 400, DS 400 Compatible with Festool DS 400 and DTS 400 sanders. Available in P40-P180 - gri...

Sandpaper Abrasives STF DELTA/9 GR/100 For DTS 400, DTSC 400, DS 400 Compatible with Festool DS 400 and DTS 400 sanders. Available in P120-P220 -...

Sandpaper Abrasives STF DELTA/9 GR/50 For DTS 400, DTSC 400, DS 400 Compatible with Festool DS 400 and DTS 400 sanders. Available in P40-P400 - g...

Abrasives Systainer³ Granat Delta GR SYS 578195 For DTS 400, DTSC 400, DS 400 The abrasives Systainer is the perfect addition to your sander. Wi...

Dowel SYS3 S 76-DBL-Set 578113 A variety of hollow wall anchors neatly organized. You are well equipped for a wide variety of applications in nea...

Edge bander KA 65 Plus USA 120V  576577 With the new CONTURO Edge Bander, it's just just as easy to apply edge banding on the job site as it is in...

Cabinet edge sc ZK HW 45/45 499749 Use the Festool carbide scraper for breaking edges, smoothing curves and cleaning thin plastic edges. Solid car...

LATERAL GUIDE SA-MFK 700 495182 When used with the Festool MFK 700 Multifunction Router, the Parallel Edge Guide allows you to rout up against, o...

Cutting Template OF-FH 2200 495246 For OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200 With two adjustable fences and integrated ru...

Edge Sanding Guide AH-ES-ETS-ETSC 205316 for ETS 125 REQ, ETSC 125 The Festool Edge Sanding Guide gives you the speed and reliable finish quality ...

CUTTER HW D 19/15 S8 OFK 700 491666 for OF 1010, OF 1010 R, OFK 700, MFK 700 for flush trimming of edges carbide blades for edges up to 15 mm in ...

Random Orbital Sander ETS 125 REQ-Plus 576070 The versatile ETS 125 has our finest sanding stroke at 5/64" (2.0 mm), and is the ideal one-handed m...

Random Orbital Sander ETS EC 125/3 EQ-Plus 576340 Equipped with the EC-TEC® Brushless Motor, these low-profile, long-life, and low-vibration sande...

Random Orbital Sander ETS EC 150/3 EQ-Plus 576326 Perfectly built for manual operation. For reduced fatigue when carrying out overhead sanding wor...

Random Orbital Sander ETS EC 150/5 EQ-Plus 576339 Perfectly built for manual operation. For reduced fatigue when carrying out overhead sanding wor...

Sander Backing Pad ST-STF D150/MJ2 For ETS 150, ETS EC 150 High material removal capacity with maximum dust extraction. The patented MULTI-JETST...

Cordless Random Orbit Sander ETSC 2 125 577735 & 577738 No cords, no limits - just a smooth finish. Whether you're in the shop or on the go, t...

Cordless Random Orbit Sander ETSC 2 150 577725 & 577728 No cords, no limits - just a smooth finish. Whether you're in the shop or on the go, t...

FS-WA-VL Guide Extension 577041 For FS-WA Angle Stop Used to extend the angle stop; stable connection to the angle stop using the connectors. Cuts ...

Festool Extension Table Base TSB/1-MW 1000  203457 for MW 1000 mobile workshop and MFT 3 Customize your MW 1000 mobile workcenter with an addit...

SELFCLEAN Filter Bag SC FIS-CT Includes five (5) bags. The new Cleantec CT dust extractor features a self-cleaning filter bag that solves a proble...

Filter holder ET-BG CT26/36 496255 Replacement part for CT 26/36. Holds filter in place on dust extractor.

Floor cleaning set RS-BD D 36-Plus 577259 The wide nozzle with two casters and two brush strip inserts makes this cleaning set optimal for cleanin...

Forstner drill SYS3 S 76-FB CE-SORT/5 578110 for Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck)for ...

Adapter AD-DOSH-FS 577293 for FS/2, FS/2 KP and GECKO Guide Rail Adapter for use with Gecko Suction Handle and Festool Guide Rail System. Secure y...

Suction Handle GECKO DOSH-Set 577294 Secure your Festool guide rail to almost any non-porous flat surface for secure and precise cutting using t...

DUAL SUCT. PAD GECKO DOSH 492617 Gecko is equipped with dual quick-release suction cups that form a tight and secure seal with non-porous material...

SLIDEWAY LINING FS-GB 10M 491741 Replacement PTE plastic Glide Strip for FS Guide Rails. Allows your TS saw to glide smoothly and consistently ove...

Velour Element GB-LAS-STF-ES/5  205493 for AH-ES-ETS/ETSC and LAS-W-ES Provides additional lining for varied surfaces Simple to replace velour pee...

Grit Abrasives STF D125 Granat For RO 125, ES 125, ETS 125, ETSC 125, ETS EC 125 Compatible with Festool ES 125, ETS 125, ROTEX RO 125 and other 5...

Festool Abrasives Roll Granat 115x25m SOFT Grit abrasives for coarse sanding applications, pack of 208 - available in P120-P600. A premium abrasiv...

Abrasive sheet D125 GR PRO for ES 125, ETS 125, ETSC 125, ETSC 2 125, ETS EC 125 Granat PROfile Abrasives – Designed for Details. Engineered for C...

Abrasive sheet D150 GR PRO for ES 150, ETS 150, ETSC 2 150, ETS EC 150, LEX 150, HSK-D 150 Granat PROfile Abrasives – Designed for Details. Engine...

Abrasive sheet 3x4 GR PRO for compatible sanders Granat PROfile Abrasives – Designed for Details. Engineered for Contours. Granat PROfile is a new...

Abrasive sheet 80x133 GR PRO for RTS 400, RTSC 400, RS 400, RS 4, LS 130, HSK-A 80x130, HSK 80x133 Granat PROfile Abrasives – Designed for Details...

Delta GR PRO for DTS 400, DTSC 400, DS 400 Granat PROfile Abrasives – Designed for Details. Engineered for Contours. Granat PROfile is a new class...

Festool Vlies Green 150mm (6")   496508 For RO 150, ES 150, ETS 150, ETS EC 150, LEX 150 Oil worked into the surface deep and evenly StickFix ...

Guide Rail FS 1080/2 491504 The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against t...

Guide rail FS 1400/2 491498 The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against t...

Guide Rail FS 1900/2 491503 The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against t...

Guide Rail FS 2700/2 491937 The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against t...

Guide Rail FS 3000/2 491501 The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against t...

Guide Rail FS 800/2 491499 The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against te...

Adapter table ADT-PS 420 497303 This base can be used to adapt your CARVEX jigsaw to a Festool guide rail to get extremely straight cuts. When use...

Bag FS-BAG The guide rail bag ensures that guide rails are perfectly protected, transported and stored. The bags have a large main compartment, in...