Skip to content
Gift Cards Hours & Location Milling Services Monthly Specials
Amana - 47102 - Flush Trim

Amana - 47102 - 3/8" Flush Trim

47102 Flush Trim 2 Flute 3/8 Dia x 1/2 x 1/4 Inch Shank Carbide Tipped Router Bit 

  • Diameter (D): 3/8"
  • Cutting Height (B): 1/2"
  • Shank (d): 1/4"
  • Overall Length (L): 2-1/16"
  • Replacement Bearing: 47702
  • Flutes: 2

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

$36.95 - $36.95
$36.95
$36.95 - $36.95
$36.95

Customer Reviews

Based on 16 reviews
88%
(14)
13%
(2)
0%
(0)
0%
(0)
0%
(0)
M
MDavis (Toronto, CA)
Faulty bit and awful customer service from KJP

Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.

Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.

Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.

Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...

That was very helpful because I wasn't aware you can buy stuff on the internet.

C
Cindy Dupere (Toronto, CA)
Great

Came in on time and in great condition

B
Bob Sparks (Toronto, CA)
Amana spiral compression bit

Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood

123
4905
Verified Reviews

47102 Flush Trim 2 Flute 3/8 Dia x 1/2 x 1/4 Inch Shank Carbide Tipped Router Bit 

  • Diameter (D): 3/8"
  • Cutting Height (B): 1/2"
  • Shank (d): 1/4"
  • Overall Length (L): 2-1/16"
  • Replacement Bearing: 47702
  • Flutes: 2

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.