Skip to content

Country

Osmo Polyx-Oil

The easiest application yet!

Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.

  • Easy to apply – used by both professionals and homeowners
  • Extremely durable and hardwearing
  • Can be spot-repaired and refreshed with no sanding required
  • Microporous finish which does not crack, peel or flake
  • Very water and dirt resistant as well as juice, tea, cola, wine, beer, coffee.
  • Enhances the wood’s natural character
  • Saliva-resistant and sweatproof, suitable for children’s toys

Coverage

Approx. Coverage 24m²/L (258 ft2/L) with one coat

Approx. Dry Time 8-10 hrs

Number of Coats 2 coats

BY HAND WITH FLEECE APPLICATOR PADS

  • Apply two thin coats with our fleece applicator pads (best way to ensure you avoid over-application).
  • Stir the Polyx®-Oil well and pour into tray
  • Work the product into the wood thinly and evenly in figure 8 or circular motions using the fleece applicator pad
  • Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
  • Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
  • Apply second coat following previous steps.

 

BY HAND WITH A CLOTH/RAG

Apply three thin coats with a lint-free microfibre cloth. ie. Osmo Easy Pads.

  • Stir the Polyx®-Oil well and prior to use
  • Work product into wood using cloth in a circular or figure 8 pattern
  • Allow roughly 15-minutes for oils to penetrate
  • Working with the grain, remove all excess product from surface
  • Allow 8-10 hours drying time prior to recoating
  • Apply second and third coats following previous steps
  • WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container

 

BY HAND WITH SCOTCHBRITE PADS

Apply two thin coats with non-abrasive white scotchbrite pads

  • Stir the Polyx®-Oil well and pour into tray
  • Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad
  • Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
  • With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks
  • Ensure all excess product is removed from surface
  • Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
  • Apply second coat following previous steps.
Size: 125 mL
Finish: Matte ( 3031 )
Original price $27.00 - Original price $199.00
Original price $27.00
$27.00
$27.00 - $199.00
Current price $27.00

Customer Reviews

Based on 7 reviews
86%
(6)
14%
(1)
0%
(0)
0%
(0)
0%
(0)
F
Francois Dore (Vaudreuil-Dorion, CA)
Osmo Polyx-oilI

Perfect easy to apply

B
Bettina Wolff (Mont-Tremblant, CA)
Great product to work with

Have used this on a table top before - this time on a bed frame. Easy to work with, relatively short drying time (8-10h to re-coat). Incredibly easy to apply and repair should the need arise. Satin Finish is matt but leaves a nice rich golden tone on maple (I believe the Matt would not change the original colour at all, but have not used this so cannot verify).

S
Steyn Hoogstad (Macklin, CA)

Osmo Polyx-Oil