4/4 Rough Cut Shedua Lumber
- Description
- Specifications
- What is Rough Cut Lumber?
Shedua wood is often called Ovangkol or Amazique!
We are excited to be stocking this exotic favorite again! It seems to have many names but whatever it is called - it sure is a beautiful wood to work with! Shedua ranges in colour from a yellowish to red/brown with darker brown or almost black streaks.
Can be used for cabinets, furniture, and wood turnings as it finishes well and really pops with a finish applied! It is also very dense and heavy - but that means it finishes well and can be nicely polished! Most often used in furniture, guitars and other instruments, inlays, handles, and turnings.
Although these boards have been skipped dress to show colour and grain, they will still require some TLC and additional milling. If you would prefer to have the milling done for you - check out our S4S Shedua Lumber.
What can you expect?
We will carefully handpick a high quality board for you. We pay close attention to the wood species characteristics so we can send you a board that well represents each wood type.
- 15/16" thick
- 5" wide
- 24",36", or 48" long
In order to offer more protective packing for shipping - our lengths are often 1/4" less than sizes listed. Need a longer length? Please email us for a quote.
Rough Cut Lumber
Who are they for? These are ideal for those who enjoy working with machinery or hand tools to mill their own boards.
We use this term to describe boards that require additional milling. Rough Cut Lumber have been run through the planer to show the grain however they have not been dressed. You will need to mill both faces and edges. Rough Cut Lumber are available in specific lengths with varying widths.
For example: 4/4 x 6" x 24”
You will receive a board that is just shy of an inch thick, with a width in the range of 5-6”, and is 24” long.
S4S Lumber
Who are they for? These are ideal for those who aren’t equipped with the necessary tools to flatten and straighten boards.
The term “surfaced” or "dressed" refers to a piece of wood that has been milled. To achieve the necessary dimensions, we select a larger board to work from. Both faces and edges are then surfaced so you can be assured that the board is flat and straight. These boards are available in specific sizes.
For example: 3/4” x 5-1/4” x 24”
