Skip to content
Gift Cards Hours & Location Milling Services Monthly Specials
Amana - 46180-K - 1/8" Compression Spiral

Amana - 46180-K - 1/8" Compression Spiral

46180-K - Compression Spiral (Solid Carbide)

  • Shank: 1/8"
  • Diameter: 1/8"
  • Cutting Length: 13/16"
  • Up Cut Height: 7/32"
  • Overall Length: 2-1/2"
  • Flutes: 2 Flute

 

Special unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Flawless compression cuts.
Excellent for cutting
  • CFRP
  • Double Sided Melamine
  • Laminate
  • Laminated Plywood
  • Melamine Particle Board
  • MDF
  • Oriented Strand Board (OSB)*
  • Particle Board
  • Softwood/Hardwood
  • Veneered Plywood

*Oriented Strand Board is an engineered wood particle board.

Router collet reduce­­r RB-102 (1/4 to 1/8) available for 1/8 shank bits.

Coating

Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.

  • nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
  • Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
  • nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.

Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.

Speed and Feed Rate

CNC running parameters based on 1 x Diameter depth per pass:

  • RPM: 18,000
  • Feed Rate: 40 IPM
  • Chip Load per tooth: 0.002"
  • Ramp down Rate: 20 IPM
$106.95 - $106.95
$106.95
$106.95 - $106.95
$106.95

Customer Reviews

Based on 16 reviews
88%
(14)
13%
(2)
0%
(0)
0%
(0)
0%
(0)
M
MDavis (Toronto, CA)
Faulty bit and awful customer service from KJP

Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.

Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.

Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.

Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...

That was very helpful because I wasn't aware you can buy stuff on the internet.

C
Cindy Dupere (Toronto, CA)
Great

Came in on time and in great condition

B
Bob Sparks (Toronto, CA)
Amana spiral compression bit

Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood

123
4919
Verified Reviews

46180-K - Compression Spiral (Solid Carbide)

  • Shank: 1/8"
  • Diameter: 1/8"
  • Cutting Length: 13/16"
  • Up Cut Height: 7/32"
  • Overall Length: 2-1/2"
  • Flutes: 2 Flute

 

Special unique carbide for longer lifetime in abrasive material. Designed for CNC applications requiring high feed rates and a clean finish. Particularly suitable for double-sided melamine or laminated material. Flawless compression cuts.
  • CFRP
  • Double Sided Melamine
  • Laminate
  • Laminated Plywood
  • Melamine Particle Board
  • MDF
  • Oriented Strand Board (OSB)*
  • Particle Board
  • Softwood/Hardwood
  • Veneered Plywood
*Oriented Strand Board is an engineered wood particle board.

Router collet reduce­­r RB-102 (1/4 to 1/8) available for 1/8 shank bits.

Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.

  • nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
  • Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
  • nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.

Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.

CNC running parameters based on 1 x Diameter depth per pass:

  • RPM: 18,000
  • Feed Rate: 40 IPM
  • Chip Load per tooth: 0.002"
  • Ramp down Rate: 20 IPM