Best selling products

UPHOLSTERY BRUS D 36 SP 440404 Fits both 27mm and 36mm diameter hoses. Plastic, diameter 2-13/16" (70 mm). Plastic

CO-174 1/4 Dia CNC High Precision Spring Collets for ER32 Tool Holder (D) Diameter: 32.7mm (L) Overall Length: 40mm Collect Standard: ER32 D1: 26m...

Non-Skid Strip FS-HU 10M  485724 Replacement non-slip adhesive strips for FS Guide Rails. Helps deliver consistent, accurate cutting results, esp...

Abrasive Material Saw Blade DIA 160x1.8x20 F4 US  205564 for TS 55 F, TSC 55 K, HK 55 and HKC 55 Festool's diamond saw blade saws all cement-bon...

Saw Blade LAMINATE/HPL HW 160x1.8x20 TF52 L  205562 for TS 55 F, TSC 55 K, HK 55 and HKC 55 Durability and precision under the toughest conditio...

Panther Saw Blade HW 160x1.8x20 PW12 US 205559 for TS 55 F, TSC 55 K, HK 55 and HKC 55 Durability and precision under the toughest conditions. Ada...

FAMAG Adjustable Countersink VARIO, TCT Professional carbide tipped adjustable countersink, countersinking angle 90°. Can be clipped universally on...

Sanding Block HSK-A 80x130 496962 Ergonomic, comfortable design is easy on the hands. Perfect for detail sanding where power sanding would be too ...

CLAMPING KIT SZ-KS 494693 Use the Clamping Kit to secure the KAPEX sliding compound miter saw to the Festool Multifunction Table. Hex bolts drop...

Insert boxes Box 50x50x68/10 204858 For clear storage and organization Boxes excl. content Dimensions (L x W x H): 1.97" x 1.97" x 2.68" (50mm x ...

51446-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut) Shank (d): 1/4" Diameter (D): 1/8" Cutting Length (B): 3/4" Overall Length (L)...

RC-2265 - 3 Flute Insert Spoilboard (Carbide, Surfacing) Shank (d): 1/4" Diameter (D): 1-1/2" Cutting Height (B): 3/4" Overall Length (L): 2" B1: ...

RC-1108 - 60° Insert V-Groove (Solid Carbide Insert) Shank (d): 1/2" Diameter (D): 1-1/16" Angle (a°): 60° Cutting Height (B): 29/32" Overall Leng...

45783 - 18° Carving Liner (Solid Carbide, for Extra-Fine Carving) Shank (d): 1/4" Diameter (D): 1/4" Angle (a°): 18° Cutting Height (B): 5/8" Over...

51405-K - Plastic Cutting (Solid Carbide, Spiral 'O' Flute, Up-Cut) Shank: 1/4" Diameter: 1/4" Cutting Length: 1" Overall Length: 2-1/2" Flutes: 1...

46286-K - Tapered Ball Nose (Solid Carbide Spiral, Up-Cut) Shank: 1/4" Angle: 3.6° Radius: 1/16" Tip Diameter: 1/8" Cutting Length: 1" Overall Len...

SC218 - Carbide Straight Two Flute Straight Bit Solid Carbide 1/2" Shank 7/32" Cutting Diameter (5.5mm) 1" Cut Length 2-3/4" Overall Length Solid...

1075A - Straight Bit 1/2" Shank Double Flute Straight Bit 19/32" Cutting Diameter 3/4" Cut Length 2-1/4" Overall Length Standard Straight bit wit...

HU5125 - Up Cut Spiral Hercules - Max Life Spirals Double Flute Up & Down Cut Solid Carbide 1/2" Shank 1/2" Cutting Diameter 1-1/4" Cut Length...

HU4125 - Up Cut Spiral Hercules - Max Life Spirals Double Flute Up & Down Cut Solid Carbide 3/8" Shank 3/8" Cutting Diameter 1-1/4" Cut Length...

HC4122 - Up/Down Cut Spiral (2+2 Compression) Hercules - Max Life Spirals Double Flute Up & Down Cut Solid Carbide 3/8" Shank 3/8" Cutting Dia...

6401 - Steel Router Collet 5/16" Inside Diameter 1/2" Outside Diameter Converts a 1/2" collet to use 5/16" shank router bits Collets are used to ...

3051 - Keyhole Bits Keyhole Bit 1/2" Shank 3/16" Small Diameter 3/8" Large Diameter 7/16" Cutting Length 2-1/8" Overall Length Originally design ...

410 - Essential Router Bit Set The woodworking hobbyist needs a variety of quality bits. Whiteside's 410 Set is considered to be the 10 Essential R...

6000E - Large Raised Panel Profile Triple Flute Large Raised Panel Bit 1/2" Shank 3-3/8" Large Diameter 1-7/16" Cut Length Our largest Raised Pan...

3374 - Vee Panel Tongue & Groove Set Two Piece Vee Panel Tongue & Groove Glue Joint Router Bit Set 1/2" Shank 5/8" to 1" Material Thicknes...

3226 - Ogee Bit Double Flute Ogee Bit 1/2" Shank 1/4" Radius 1-1/2" Large Diameter 5/8" Cut Length 2-3/8" Overall Length An Ogee bit is one of th...

3246 - Edge Beading Bit Double Flute Edge Beading Bit 1/2" Shank 7/8" Large Diameter 9/16" Cut Length 2-1/4" Overall Length An Edge Beading bit c...

3254 - Edge Beading Bit Double Flute Edge Beading Bit 1/2" Shank 1-1/16" Large Diameter 3/4" Cut Length 2-1/2" Overall Length An Edge Beading bit...

3294 - Thumbnail Table Edge Double Flute Thumbnail Table Edge Bit 1/2" Shank 1" Profile Width 12-1/2" Large Diameter 3/4" Cutting Length 2-1/2" Ov...

1572 - Point Cutting Roundover Bit Double Flute Point Cutting Roundover Bit 1/4" Shank 1/4" Radius 1/2" Cutting Diameter 1/2" Cut Length 2" Overal...

1574 - Point Cutting Roundover Bit Double Flute Point Cutting Roundover Bit 1/4" Shank 3/8" Radius 3/4" Cutting Diameter 5/8" Cut Length 2" Overal...

1804 - Cove Bit Double Flute Cove Bit 1/2" Shank 3/8" Radius 1-1/4" Large Diameter 1/2" Cut Length Cove bits are used to add a decorative edge to...

1506 - 90° V-Groove Bit Double Flute V-Groove Bit 1/2" Shank 90° Angle 1" Cutting Diameter 1/2" Point Length 2-1/4" Overall Length V-Groove bits ...

1500 - 90° V-Groove Bit Double Flute V-Groove Bit Whole Bit Solid Carbide 1/4" Shank 90° Angle 1/4" Cutting Diameter 1/8" Point Length 1-1/2" Over...

1072 - Straight Bit 1/2" Shank Double Flute Straight Bit 1/2" Cutting Diameter 2" Cut Length 4-1/8" Overall Length Standard Straight bit with a 1...

SC71 - 30° Engraving Bit Solid Carbide 1/32" Flat Point 30° Included Angle 2" Overall Length Engraving bit for small CNC machines, different angl...

SB-INSERT - Spoilboard Replacement Insert A 10 piece pack of Carbide Inserts to be used on Whiteside's large CNC Spoilboard Surfacing bits.

RU4900 - Up Cut Spiral Double Flute Up Cut Spiral Bit Solid Carbide 1/2" Shank 3/8" Cutting Diameter 1-1/4" Cut Length 3" Overall Length Spiral b...

D7-875 - 7° Dovetail Bit Double Flute Dovetail Bit 7° Used for Stair Treads 1/2" Shank 7/8" Large Diameter 7/8" Depth of Cut 2-1/2" Overall Length...

Saw blade USB 78/32/Bi/OSC/5 203337 The Festool Universal Saw Blade USB 78/32/Bi/OSC is a 78mm blade ideal for plunge cuts. The Bimetal design make...

CLAMPING COLLET SZ-D 8/OF 900/1000 488755 for MFK/OFK 700, OF 900, OF 1000, OF 1010, OF 1010 R, KF Clamping collet 8 mm, SZ-D8/OF1010 Faster ...

Battery pack BP 18 Li 4,0 HPC-ASI 205036 The lithium high-power compact battery packs: Effortless work thanks to the weight of 600 g. This makes it...

Drill countersink BSTA HS D 4.5 CE 492524 Adustable countersink drill bit with a free spinning depth stop for use with the Centrotec system. The C...

Cordless Oscillator OSC 18 HPC 4.0 EI-Set 576590 The ultimate in versatility, the cordless VECTURO oscillating multi-tool combines limitless funct...

CENTERING CONE ZD-OF/D 6.35+8 492187 For use with all Festool routers. Works with 1/4" and 8 mm collets. For shank support dia. 1/4“ (6.35 mm) ...

Festool T 18+3-E 576758 The T 18 E offers an impressive service life thanks to the perfect combination of the new generation brushless EC TEC motor...