Never worry about spills and leaks again!
We've all made epoxy forms using plywood and tape - but between the cost, time, and single use - it leaves something to be desired. KJP is happy to finally introduce a reusable HDPE pre-made form that will solve all these problems!
These Vacuumed Formed Reusable NO LEAK FORMS are designed with the DIY’er and Weekend Warrior in mind, they are very affordable for someone just starting off in the epoxy world.
These forms are made with a single piece of 1/4” HDPE making it very flexible (sides may not perfectly straight when unboxed, can be straighten out by hand) the sides are 3 “ high and never require sealant.
Simply tap the inside of the sides, turn the form over and tap the back with a mallet and watch your creation pop out of the mold. The sides are fabricated at a 1 degree to allow your project to drop out.
Place form flat on a work table, do not have it elevated (Blocks, saw horses, clamps). If elevated the form will bow due to the epoxy heating up and expanding the HDPE.
- Welded sides (3" high) to create a tight seal that never requires sealing with silicone
- Vaccumed formed
- HDPE non-stick plastic - no release agent needed!