Skip to content
Gift Cards Hours & Location Milling Services Monthly Specials
Osmo Polyx-Oil 3043 Satin

Osmo Polyx-Oil

The easiest application yet!

Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.

  • Easy to apply – used by both professionals and homeowners
  • Extremely durable and hardwearing
  • Can be spot-repaired and refreshed with no sanding required
  • Microporous finish which does not crack, peel or flake
  • Very water and dirt resistant as well as juice, tea, cola, wine, beer, coffee.
  • Enhances the wood’s natural character
  • Saliva-resistant and sweatproof, suitable for children’s toys
Coverage

Coverage

Approx. Coverage 24m²/L (258 ft2/L) with one coat

Approx. Dry Time 8-10 hrs

Number of Coats 2 coats

Application Instructions

BY HAND WITH FLEECE APPLICATOR PADS

  • Apply two thin coats with our fleece applicator pads (best way to ensure you avoid over-application).
  • Stir the Polyx®-Oil well and pour into tray
  • Work the product into the wood thinly and evenly in figure 8 or circular motions using the fleece applicator pad
  • Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
  • Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
  • Apply second coat following previous steps.

 

BY HAND WITH A CLOTH/RAG

Apply three thin coats with a lint-free microfibre cloth. ie. Osmo Easy Pads.

  • Stir the Polyx®-Oil well and prior to use
  • Work product into wood using cloth in a circular or figure 8 pattern
  • Allow roughly 15-minutes for oils to penetrate
  • Working with the grain, remove all excess product from surface
  • Allow 8-10 hours drying time prior to recoating
  • Apply second and third coats following previous steps
  • WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container

 

BY HAND WITH SCOTCHBRITE PADS

Apply two thin coats with non-abrasive white scotchbrite pads

  • Stir the Polyx®-Oil well and pour into tray
  • Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad
  • Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
  • With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks
  • Ensure all excess product is removed from surface
  • Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
  • Apply second coat following previous steps.
Size: 125 mL
Finish: Matte ( 3031 )
$27.00 - $199.00
$27.00
$27.95
$27.95 - $207.95
$27.95

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Mark J. (Montreal, CA)
Great Stuff

I used this on a large coffee table I built. Works great! Table turned out beautiful.

F
François Doré (Vaudreuil-Dorion, CA)
Osmo Polyx-oilI

Perfect easy to apply

B
Bettina Wolff (Mont-Tremblant, CA)
Great product to work with

Have used this on a table top before - this time on a bed frame. Easy to work with, relatively short drying time (8-10h to re-coat). Incredibly easy to apply and repair should the need arise. Satin Finish is matt but leaves a nice rich golden tone on maple (I believe the Matt would not change the original colour at all, but have not used this so cannot verify).

123
4992
Verified Reviews

The easiest application yet!

Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.

  • Easy to apply – used by both professionals and homeowners
  • Extremely durable and hardwearing
  • Can be spot-repaired and refreshed with no sanding required
  • Microporous finish which does not crack, peel or flake
  • Very water and dirt resistant as well as juice, tea, cola, wine, beer, coffee.
  • Enhances the wood’s natural character
  • Saliva-resistant and sweatproof, suitable for children’s toys

Coverage

Approx. Coverage 24m²/L (258 ft2/L) with one coat

Approx. Dry Time 8-10 hrs

Number of Coats 2 coats

BY HAND WITH FLEECE APPLICATOR PADS

  • Apply two thin coats with our fleece applicator pads (best way to ensure you avoid over-application).
  • Stir the Polyx®-Oil well and pour into tray
  • Work the product into the wood thinly and evenly in figure 8 or circular motions using the fleece applicator pad
  • Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
  • Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
  • Apply second coat following previous steps.

 

BY HAND WITH A CLOTH/RAG

Apply three thin coats with a lint-free microfibre cloth. ie. Osmo Easy Pads.

  • Stir the Polyx®-Oil well and prior to use
  • Work product into wood using cloth in a circular or figure 8 pattern
  • Allow roughly 15-minutes for oils to penetrate
  • Working with the grain, remove all excess product from surface
  • Allow 8-10 hours drying time prior to recoating
  • Apply second and third coats following previous steps
  • WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container

 

BY HAND WITH SCOTCHBRITE PADS

Apply two thin coats with non-abrasive white scotchbrite pads

  • Stir the Polyx®-Oil well and pour into tray
  • Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad
  • Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes
  • With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks
  • Ensure all excess product is removed from surface
  • Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
  • Apply second coat following previous steps.