Skip to content
Gift Cards Hours & Location Milling Services Monthly Specials
Carbide Tipped Prestige® Fine Trim 10" x 80 Tooth (610800C)

Amana - 10" x 80 Tooth - Fine Trim Crosscut Saw Blade

Carbide Tipped Prestige® Fine Trim 10" x 80 Tooth (610800C)

  • Diameter: 10" (250mm)
  • Teeth: 80
  • Bore: 5/8"
  • Tooth Grind: ATB 
  • Hook Angle: 10°
  • Kerf: 0.126" (3.2mm)
  • Plate: 0.087" (2.2mm)
  • Max RPM: 7600

 

The trim blade, suitable for use on table saws, sliding table saws, radial arms, and miter saws of all types, leaves a super-smooth finish when cutting hard or softwood. It is especially suited to trimming and sizing veneers and laminates, in single sheets or in stacks. The alternate top bevel grind and high tooth counts produce excellent, chip-free cuts. The 10° hook angle provides effortless feeding.

$205.95 - $205.95
$205.95
$197.95
$197.95 - $197.95
$197.95

Customer Reviews

Based on 16 reviews
88%
(14)
13%
(2)
0%
(0)
0%
(0)
0%
(0)
100.0
100.0
M
MDavis (Toronto, CA)
Faulty bit and awful customer service from KJP

Had an issue with one of the two I purchased. Contacted Amana who told me to get a RMA from KJP. My initial contact was ignored (no response then a confirmation I was being ignored when someone accidentally replied all instead of sending a bcc) Then I was offered the opportunity to return the bit via post at my expense (don't live in Ottawa no mo') provided it had not been used. In my original email I said I got home and used it. The issue was it marred the work and the only way one could see that is if ya used the bit.

Turns out there was a problem the bit was defective and Amana took care of me without any assistance from KJP.

Was a gross interaction and I don't know why Andrew was such a meanie Richard head from the jump.

Really good bit. The pilot drill broke pretty early on. Seems to be a somewhat common issue. So I happened to be back in Ottawa and decided to pop in to KJP. Ran in to Andrew, who had no idea who I was, and asked about buying a replacement pilot drill. He was rude af and told me they don't stock the drill but I could go online and order it tho...

That was very helpful because I wasn't aware you can buy stuff on the internet.

C
Cindy Dupere (Toronto, CA)
Great

Came in on time and in great condition

B
Bob Sparks (Toronto, CA)
Amana spiral compression bit

Excellent bit with Spectra finish, very clean cutting leaving very clean top and bottom edges on Baltic Birch plywood

123
5275
Verified Reviews
Description

Carbide Tipped Prestige® Fine Trim 10" x 80 Tooth (610800C)

  • Diameter: 10" (250mm)
  • Teeth: 80
  • Bore: 5/8"
  • Tooth Grind: ATB 
  • Hook Angle: 10°
  • Kerf: 0.126" (3.2mm)
  • Plate: 0.087" (2.2mm)
  • Max RPM: 7600

 

The trim blade, suitable for use on table saws, sliding table saws, radial arms, and miter saws of all types, leaves a super-smooth finish when cutting hard or softwood. It is especially suited to trimming and sizing veneers and laminates, in single sheets or in stacks. The alternate top bevel grind and high tooth counts produce excellent, chip-free cuts. The 10° hook angle provides effortless feeding.