Melbourne Tool Company - Large Router Plane Blades (Imperial)

MTC Large Router Plane Blades (Imperial)

If you want to create clean bottomed inlays, rebates or trenches, you will need a router plane. The Melbourne Tool Company Large Router Plane is the essential tool for creating precise clean bottomed inlays, rebates or trenches. A go-to tool for anyone loves to work with wood.

50-degree straight blades - The MTC Large Router Plane is a unique router plane. Unlike many other router planes, the blade is made from a straight square section of HSS steel set bevel-down in the plane at 50 degrees - the blade bevel is only present to relieve the cut. This provides you with a very effective angle of attack suitable for all types of trenching work, and a router plane that is extremely easy to sharpen.

Easy to sharpen - Because the blades are made from a single piece of straight steel, the blades are very easy to sharpen. Simply remove the blade from the plane body, sharpen like you would a mortise chisel and then reset. No special jigs or equipment required! Watch your productivity grow with this versatile hand tool.

M2 High Speed Steel blades - MTC has chosen M2 High Speed Steel (HSS) for the blades. M2 HSS has high abrasion resistance which means it will hold a sharp edge much longer than many other steels. This also means that it may take a little longer to bring up an edge. Don’t worry, you will be leaving your sharpening gear on the shelf for a lot longer too.

A range of blade widths - The MTC Large Router Plane is supplied with a 1/2in (12.7mm) wide blade. Additional blades are available in a range of widths both Metric and Imperial.

Metric blades available include these widths:

• 1/8" (3.2mm) MTC-11145
• 3/16" (4.8mm) MTC-11169
• 1/4" (6.4mm) MTC-11183
• 5/16" (7.9mm) MTC-11206
• 3/8" (9.5mm) MTC-11213
• 1/2" (12.7mm) MTC-11220