Discounted Shipping
Spray solution for everyday cleaning and maintenance, developed for hardwax-oil wood surfaces. Contains soaps based on natural oils which prevent the wood from drying out. The water-soluble ingredients prevent streaks and do not form a layer. Especially mild on skin, free of dyes and aromas, biodegradable, free of solvents and emissions to ensure the surface remains food safe – supporting a healthy living environment.
Coverage
Approx. Coverage 295-305m²/L (850-1000 ft2/L)
Approx. Dry Time 30 - 40 minutes
Cleaning & Removing Stains:
Apply a small amount on a cloth or White Scotchbrite pad and scrub the dirty area
For Heavier Stains: Apply to floor with Osmo polishing pad (very thin steel wool) or on Oak floors, a Green Scotchbrite pad. Wipe off dirt residues and reapply Osmo Polyx®-Oil to area and blend into the existing finish.
Manually with a Cloth / Rag:
Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet
This material is a game-changer in the world laser engraving! The quality of the plywood is exceptional, with a perfectly smooth, perfectly flat surface (no surprise here) that makes it a joy to work with. The finish feels a little plastic, but I understand it’s an acrylic coating over the maple fibre, which I love. Even laser-fog burn marks wipe off with a damp cloth — no masking needed. The maple grain is pronounced and it cuts cleanly and sands beautifully. 100% will purchase again.
These work well with my Festool 125 RO in the fine mode as they leave no sanding marks compared to non festool discs.
Very satisfied....the oak grain was beautiful...milling was A1 and glued together with no problems....will buy from here again