Rubio Monocoat - Maintenance Oil

Increase the sheen and nourish wood!

RMC Universal Maintenance Oil is a maintenance product to refresh wood that has been treated with Rubio Monocoat Oil, as well as to upgrade surfaces finished with other oils. It will nourish the wood, give it a fuller look (satin sheen) and increase the fluid resistance. 

Maintenance with the RMC Oil Plus 2C in its original colour should be done when the treated surface starts to show too much wear and tear or if the colour needs to be repaired.

Maintenance Oil in black and white can be ordered upon request - please contact us for more information. 

• Universal use.
• Specifically suited for 'high traffic' zones.
• Adds a light glow to the surface.
• Available in 3 colours: Pure, White and Black.
• 0% VOC!

How much does this cover?

• 100ml - 150-200 ft²
• 500ml - 750-100 ft²

Instructions

No professional expertise is required to treat your floor with RMC Universal Maintenance Oil.

1. Eliminate dirt and dust from the floor.

2. Clean the floor thoroughly with Rubio Monocoat Soap and water. Rinse well with water to eliminate any soap residues. Leave it to dry completely.

3. Manual application – Apply the oil using a cloth, brush, or sponge. Mechanical application – Apply the oil using a floor polisher and a beige colored pad. Treat areas of preferably 2 to 4 m2. Each treated area should be wiped dry using kitchen tissue or a cotton cloth within 15 minutes. When using a floor polisher, wipe dry using a white pad.

4. Ensure the room is well-ventilated. The floor should be dry after 6 - 8 hours.

During the first week clean only using a wet cloth. Later, RMC Soap may be used.