Rubio Monocoat - Oil Plus 2C - Colours - 1.3L

Protects and colors your wood in one single layer!

Oil Plus 2C is a hardwax oil wood protector that colors and protects in only 1 single layer! Using advanced molecular bonding, it protects wood from water, heat and daily wear & tear. It is the best oil for wood furniture, hardwood flooring, tables, and just about anything made out of wood!

• Enhances the natural look and feel of the wood.
• 0% VOC, does not contain any water or solvents.
• Easy to maintain.
• No overlaps or starting marks.
• Minimal use: 30 - 50 m²/L (300 - 500 ft²/L.)
• Can be applied to all wood types.
• Very wear-resistant.
• Water- and heat-resistant, ideal for kitchens and bathrooms.

CLICK HERE TO SEE COLOURS ON MAPLE, RED/WHITE OAK, & WALNUT

What is included?

This 1.3L size also comes with (Part B) that you mix together in a 3-1 ratio. This ensures a quick dry, quick cure, and superior protection. 

Although you do not need to use the Part B, we find that most of our customers prefer the efficiency and faster curing results. 

How much does this cover?

The amount of square feet you are able to cover greatly depends on the type of wood you are using. Softer woods will absorb more of the oil product while the denser woods or closed grain species may yield more coverage.

• 1.3L - 390-650 ft²

Instructions

Step 1. Untreated wood: sand scratch-free without over-polishing the surface. Thoroughly remove sanding dust with a vacuum cleaner and remove the remaining dust particles with Rubio Monocoat Cleaner. Open wood pores guarantee a long-lasting finish and are essential for the absorption of the oil. We therefore strongly recommend moistening the surface evenly with water (water popping). In case of water popping, there is no need to apply Rubio Monocoat Cleaner.

Step 2. Carefully mix the two components (1 to 2 minutes) with a ratio of appr. 3 units A to 1 unit B.

Step 3. Once the cleaned surface is dry, spread out a small quantity of Rubio Monocoat Oil Plus 2C (cloth or polishing machine with thin beige pad). Work in zones of 5 - 10 m2.

Step 4. Let absorb during a few minutes. Thoroughly remove all excess of oil (cloth or polishing machine with white pad) within 15 minutes per zone. The surface should feel dry! Finish all zones the same way. STEP 5. In a well ventilated room, the surface can be used 24 - 36 hours after the application.

After 5 days a treatment with water and Rubio Monocoat products can be applied.

In order to guarantee a long lifespan and protection, the use of Rubio Monocoat maintenance products is imperative.

Tips & tricks

• The product may NOT be diluted!
• Stir the product well before application. When using several containers at one site, it is recommended to mix them for an even result. · Temperature application range : 8 – 30 °C
• Humidity application range: follow wood specs