Skip to content


Ryver R-Fast

The new R-Fast is not only fast, it’s REALLY FAST!

The R-Fast is specially designed for charcuterie board and any other artistic project. A maximum of 6 liters per pour is recommended. Maximum recommended thickness is 1″ with a maximum of 6 liters per pour.

  • Improved cure time, 24 hours
  • Clear and bubble-free.
  • Anti-yellowing UV resin
  • Improved hardness adapted to the movements of the wood.
  • Solvent-free
  • When catalyzed, R-FAST meets FDA requirements (contact with food)

The use of fans is strongly recommended for thick castings.

Technical Data Sheet


  • In case of freezing: The molecules of part A tend to agglomerate in cold weather, which has the effect of creating the formation of crystals/sediment in the bottom of the container (the epoxy has a blurred appearance). It is essential to heat the containers in a water bath until the temperature of the product reaches 55°C (130F). Following this procedure, the product will become completely liquid. Please note that no replacement or compensation will be granted. It is the responsibility of the user to check the condition of the product before each use. See crystallization document
  • R-Fast should be kept in a dry place between 15°C and 25°C ( 59F/ 77F), away from the sun and out of reach of children.
  • Resin and hardener should not be left in an open container.
  • It should not be used when humidity is above 60% and when the temperature exceeds 25°C.
  • R-Fast should be used within one year of purchase.
  • Use a fan during high-mass castings to avoid any risk of exothermic reaction.
Size: 1.5 Gal ( 5.7 L )
Original price $144.95 - Original price $144.95
Original price
$144.95 - $144.95
Current price $144.95

Customer Reviews

Be the first to write a review