Titebond II Premium Extend Wood Glue

15 minute open time!

A slower-setting version of Premium Wood Glue, it is ideal for more complex woodworking assemblies.

Titebond II Extend Wood Glue combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set. It is ideal for exterior applications that involve more complex assemblies. It also provides a translucent glue line, offers excellent sandability and is unaffected by finishes. Titebond II Extend offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials. In addition, it is compatible for use with Hot Press and radio frequency (R-F) gluing systems.

• Open Assembly Time: 15 minutes 
• Total Assembly Time: 20-25 minutes 
• Dried Colour: Cream

Features & Benefits

• Passes Type II water-resistance testing
• Slower speed of set - Longer open time
• Hot press and R-F compatible
• Solvent-resistant
• Excellent sandability

Application Guildelines

• Application Temperature: Above 60°F
• Open Assembly Time: 15 minutes (70°F./50% RH)
• Total Assembly Time: 20-25 minutes (70°F./50%RH)
• Minimum Required Spread : Approximately 6 mils or 250 square feet per gallon
• Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
• Method of Application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond II Extend Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 60°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. If product appears to have settled, stir to ensure uniformity. Because of variances in the surface of treated lumber, it is a good idea to test for adhesion.